Drills

Tork Craft Nut & Stop Lever (10, 11) Service Kit (TCMD0068HD-SK03) At a Glance: Replacement nut and stop lever components for reference parts (10 and 11) on TCMD0068HD mag base drills. On a mag base drill, small control parts make a big difference. A stop lever helps you set limits and repeat operations consistently, while the nut secures the assembly so settings don’t wander mid-job. If the lever is bent, worn, or the nut threads are damaged, you can end up with slipping adjustments, inco..

Tork Craft Oil Ring & Pressboard Washer (20-22, 43-46) Motor Service Kit (TCMD0055QE-SK10) At a Glance: Oil ring and pressboard washer set for motor assembly reference parts (20–22 and 43–46) on TCMD0055QE mag base drills. Inside a hard-working mag drill motor, small parts often make the biggest difference. Oil rings help manage lubrication where it’s needed, and pressboard washers act as important spacers/insulators that keep assemblies correctly positioned and protected. When these compo..

Tork Craft Output Shaft & Bearing Compl. (3-6/9) Service Kit For TCID1100 At a Glance: Output shaft and bearing complete assembly (parts 3–6 and 9) for the Tork Craft TCID1100 If your impact tool starts feeling rough, noisy, or develops play at the output, the output shaft and bearing area is often where the trouble lives. These components carry load, keep alignment true, and transfer torque from the gearbox to the bit. The Tork Craft TCID1100-SK01 Output Shaft & Bearing Compl. service kit..

Tork Craft Output Shaft & Big Gear Compl. Kit (5-11/15) Service Kit For TCID0850 At a Glance: Output shaft and big gear complete service kit (parts 5–11 and 15) for the Tork Craft TCID0850 impact driver An impact driver can have a strong motor and still feel weak if the drive train is worn. If you’re hearing grinding, feeling slipping under load, or noticing inconsistent power delivery, the output shaft and primary gear set are prime suspects. The Tork Craft TCID0850-SK02 Output Shaft & Bi..

Tork Craft Panel & Gasket (32/33) Stand Service Kit At a Glance: Replacement panel and gasket components (parts 32 and 33) for the Tork Craft TCDM0035PM stand Dust, vibration and workshop life have a way of turning small gaps into big problems. If your stand’s panel is cracked, missing, or the gasket has flattened and stopped sealing properly, you’re inviting dust and debris into places that really don’t want it—especially around controls and wiring. The Tork Craft TCDM0035PM-SK27 Panel & ..

Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035-50HD-SK18) At a Glance: Replacement panel plate with screws for the TCMD0035-50HD stand—diagram parts (36, 37, 39, 40 and 48) for secure mounting and proper protection. The panel plate does two important jobs: it keeps the control area properly protected and it holds components in the correct position so everything lines up, fits neatly, and stays secure under vibration. If the plate is cracked, be..

Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035HD-SK18) At a Glance: Replacement panel plate with screws for the TCMD0035HD stand—diagram parts (36/37/39/40/48) for a secure, protected assembly. A missing panel plate or stripped screws might look like a minor problem… right up until dust, slurry and workshop grit start finding their way into places they shouldn’t. The Tork Craft TCMD0035HD-SK18 Panel Plate With Screws Stand Service Kit replaces ..

Tork Craft Panel Plate With Screws (32, 37, 38) Stand Service Kit (TCMD0068HD-SK20) At a Glance: Replacement panel plate supplied with screws for stand reference parts (32, 37 and 38) on TCMD0068HD mag base drills. That panel plate might look like a simple cover, but it plays an important role in keeping assemblies secure, aligned and protected from workshop grime. If the plate is bent, cracked, missing, or the screws have stripped, you can end up with loose fitment, exposed components and..

Tork Craft Parameter & Control Panel (35/36/42) Stand Service Kit At a Glance: Replacement parameter and control panel components (parts 35, 36 and 42) for the Tork Craft TCDM0035PM stand When the control panel is damaged, unresponsive, or your stand’s settings stop behaving consistently, the whole setup becomes frustrating (and in some cases, unsafe). The Tork Craft TCDM0035PM-SK26 Parameter & Control Panel stand service kit replaces the panel-related components (parts 35, 36 and 42), hel..

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit At a Glance: ; Replacement pinion shaft and key set covering stand parts 10-13 for the TCMD0055QE. If the feed action on your magnetic base drill feels sloppy, uneven, or starts slipping under load, the pinion shaft and key are prime suspects. This Tork Craft Pinion Shaft & Key stand service kit (parts 10-13) is made to restore solid engagement in the feed/drive mechanism on the TCMD0055QE, helping you get back to controlled, confiden..

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit (TCMD0035QE-SK019) At a Glance: Replacement pinion shaft and key for the TCMD0035QE stand—diagram parts (10–13) to restore solid feed engagement and smooth travel. The stand feed should feel direct: turn the handle, the head moves—smoothly and without surprises. When the pinion shaft or key wears, slips, or shears, you can get dead spots, uneven engagement, clicking under load, or sloppy movement that makes accurate drill..

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlled moveme..