Drills

Tork Craft Repl. Handle (19-22) Stand Service Kit (TCMD0068HD-SK19) At a Glance: Replacement handle components for stand reference parts (19–22) on TCMD0068HD mag base drills. The feed handle is where you and the machine meet. If the handle is bent, cracked, slipping, or loose, you lose control—making drilling less accurate and a lot less safe. The Tork Craft TCMD0068HD-SK19 Replacement Handle Stand Service Kit replaces the handle components referenced as parts (19–22), helping restore smo..

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035-50HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035-50HD stand—diagram parts (26–28) for comfortable grip and positive feed control. A feed handle is where you and the machine meet. If it’s cracked, loose, bent, or missing, you lose control and the stand becomes awkward (and unsafe) to operate—especially under load. The Tork Craft TCMD0035-50HD-SK17 Replacement Handle Stand Service Kit replaces ..

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035HD stand—diagram parts (26–28) for smooth, controlled drilling feed. The handle is where your control lives. If it’s bent, cracked, slipping, or just plain uncomfortable, your drilling accuracy and safety take a knock. The Tork Craft TCMD0035HD-SK17 Replacement Handle Stand Service Kit replaces the components referenced as parts (26–28), resto..

Tork Craft Repl. Handle/Pinion/Gear/Bearing (1–23) Service Kit At a Glance: ; Replacement drive-side components covering parts 1–23 for the TCMD0055QE magnetic base drill. When a magnetic base drill starts feeling rough, noisy, or “notchy” through the feed handle, it’s usually the drive-side parts begging for attention. This Tork Craft service kit replaces the key handle/pinion/gear/bearing components (parts 1–23) that keep the feed and drivetrain running smoothly. It’s the right move when..

Tork Craft Repl. MT2 Taper Shaft (7) Service Kit (TCMD0068HD-SK02) At a Glance: Replacement MT2 taper shaft for reference part (7) on TCMD0068HD mag base drills. A mag base drill is only as accurate as the interface that holds the tool. If the taper shaft is worn, scored, or no longer grips correctly, you can get slipping, run-out, poor hole finish, and tool ejection risks—none of which are fun surprises on a steel job. The Tork Craft TCMD0068HD-SK02 Replacement MT2 Taper Shaft replaces th..

Tork Craft Repl. Trigger Compl. Kit (26-28) Service Kit For TCID0850 At a Glance: Replacement trigger complete kit (parts 26–28) for the Tork Craft TCID0850 impact driver A worn trigger turns a perfectly good impact driver into a temperamental gremlin—starts and stops when it feels like it, has dead spots, or refuses to hold a steady speed. The Tork Craft TCID0850-SK09 Repl. Trigger Compl. kit replaces the trigger components (parts 26–28), restoring proper control response and more dependa..

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

TorkCraft - Cordless Rotary Hammer RH500 The rotary hammer is powered by a powerful 20V battery (not included). The auxiliary handle can be positioned 360 degrees around the chuck for added control when drilling or chiseling. The rotary hammer makes use of SDS plus accessories and a built-in light illuminates the surface for increased visibility. Includes Blow Mould Case for storage. Batteries and charger not included. Standard Charger - T..

Tork Craft Safety Protection Lanyard for Mag Base Drills (TCMD005) Highlights: Durable safety lanyard designed specifically for magnetic-base drills to prevent tool drops and ensure secure operation The Tork Craft Safety Protection Lanyard for Mag Base Drills (model TCMD005) is a simple yet crucial accessory for any workshop using magnetic-base drilling systems. It attaches securely to the drill or mag base and provides a strong tether to anchor the tool — giving peace of mind when working..

Tork Craft Shift Knob Compl. Set (24, 35-40) Motor Kit (TCMD0055QE-SK07) At a Glance: Complete shift knob set for motor assembly reference parts (24, 35–40) on TCMD0055QE mag base drills. When you need the right speed and torque for the job, the shift mechanism is your control centre. If the shift knob feels loose, won’t select properly, slips out of range, or the components have worn or cracked, you’re left fighting the tool instead of the cut. The Tork Craft TCMD0055QE-SK07 Shift Knob Co..

Tork Craft Speed & Motor Switch (39-41) Stand Service Kit (TCMD0068HD-SK22) At a Glance: Replacement speed and motor switch components for stand reference parts (39–41) on TCMD0068HD mag base drills. Switching is the drill’s “command centre”—if the speed selector or motor switch starts failing, you can get intermittent power, dead starts, cut-outs under load, or controls that feel loose and unreliable. The Tork Craft TCMD0068HD-SK22 Speed & Motor Switch Stand Service Kit replaces the switc..

Tork Craft Speed Control & Circuit Board (33-36) Stand Service Kit (TCMD0068HD-SK21) At a Glance: Replacement speed control and circuit board components for stand reference parts (33–36) on TCMD0068HD mag base drills. When a mag drill starts acting haunted—surging, losing power, refusing to hold speed, or cutting out under load—the culprit is often in the control electronics. The speed control and circuit board manage how power is delivered to the motor, helping keep speed steady and opera..