Drills

GEARBOX WITH SCREWS (12/24) MOTOR SERVICE KIT....

Tork Craft Housing Kit Complete (28/33/34/39/41-43) Motor Service Kit (TCMD0035-50HD-SK09) At a Glance: Replacement motor housing component kit for the TCMD0035-50HD—diagram parts (28, 33, 34, 39 and 41–43) to restore fitment, support and protection. Motor housings do more than just “cover the parts”. They keep everything aligned, hold bearings and components in the correct position, protect wiring, and shield the motor from dust, slurry and impact. If a housing cracks, strips..

Tork Craft Housing Kit Coml. (33, 38, 39, 45-47, 49, 50) Motor Service Kit (TCMD0068HD-SK12) At a Glance: Complete housing component kit for motor assembly reference parts (33, 38, 39, 45–47, 49, 50) on TCMD0068HD mag base drills. The motor housing is more than just a cover—it’s the alignment backbone and protective shell that keeps everything seated correctly while the drill works under load. If housing sections are cracked, stripped, warped, or damaged by impact and heat, you can end up ..

Tork Craft Housing Kit Coml. (33, 38, 39, 45, 46, 48) Motor Service Kit (TCMD0035-SK14) At a Glance: Complete housing component kit for motor assembly reference parts (33, 38, 39, 45, 46, 48) on TCMD0035 series mag base drills. The motor housing does more than “hold things together” — it keeps everything aligned, protected, and properly seated so the motor can run smoothly under load. If housings are cracked, stripped, warped, or damaged by impact and heat, you can end up with vibration, p..

Tork Craft Housing Kit Coml. (51, 56, 57, 63, 64, 66) Motor Service Kit (TCMD0055QE-SK14) At a Glance: Complete housing component kit for motor assembly reference parts (51, 56, 57, 63, 64, 66) on TCMD0055QE mag base drills. The motor housing is the drill’s protective shell and alignment backbone—keeping everything seated, secure and correctly spaced so the motor can run smoothly under load. If housing sections are cracked, stripped, warped, or damaged by impact and heat, you can end up wi..

Tork Craft Housing L/R With Screws (31/33) Service Kit For TCID0850 At a Glance: Replacement left and right housing with screws (parts 31 and 33) for the Tork Craft TCID0850 impact driver An impact driver’s housing does a lot more than look pretty. It protects the motor and wiring, supports internal components, and gives you the grip and structure needed to control the tool under repeated impact loads. If your TCID0850 housing is cracked, stripped at the screw bosses, or no longer closing ..

Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100 At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100 The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw points, or no longer closing properly, the tool can ..

Tork Craft Imp. Drill Carbon Brush Pair (23) Service Kit For TCID0850 At a Glance: Replacement carbon brush pair (part 23) for the Tork Craft TCID0850 impact driver motor Carbon brushes are the “contact point” between your power source and the spinning armature inside the motor. When they wear down, the tool starts complaining—weak power, intermittent running, excessive sparking, and sometimes a refusal to start unless you coax it. The Tork Craft TCID0850-SK07 Imp. Drill Carbon Brush Pair ..

Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100 At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..

Tork Craft Imp. Drill Stator (19) Service Kit For TCID0850 At a Glance: Replacement stator (part 19) service kit for the Tork Craft TCID0850 impact driver motor When an impact driver starts losing power, running hot, or tripping out unexpectedly, the fault isn’t always in the brushes or switch—sometimes the motor’s stationary windings (the stator) are the real culprit. The Tork Craft TCID0850-SK05 Imp. Drill Stator service kit replaces the stator component (part 19), restoring the magnetic..

Tork Craft Imp. Drill Stator (41) Service Kit For TCID1100 At a Glance: Replacement stator (part 41) service kit for the Tork Craft TCID1100 motor The stator is the stationary half of the motor that creates the magnetic field your tool needs to make torque. When stator windings are damaged, burnt, or shorted, the symptoms are usually loud and clear: reduced power, overheating, intermittent running, tripping, and that tell-tale “electrical” smell. The Tork Craft TCID1100-SK08 Imp. Drill Sta..

Tork Craft Impact Drill + Tin Drill Set (TORKIT014) Get the best of both worlds: the Tork Craft Impact Drill TCID0850 paired with the NR02013 Tin Drill Set in one smart kit. Whether drilling into timber, steel, masonry or installing fasteners, this combo gives you power and precision in one box. Use the impact function as you need, and tap into the drill bit set for versatile coverage across materials. It’s built to perform on tough jobs—robust motor, keyed metal ..