Drills

35mm MAGNETIC BASE DRILL 16000N The magnetic base drill is fitted on a strong dual-coil magnet (electromagnet) with a maximum core drill capacity of 35mm. Application: Building construction Bridge construction Ship/Marine Construction Annular cutters or twist drill bits Horizontal or overhead drilling Great for horizontal, side face and top face drilling....

35mm MAGNETIC BASE DRILL 14800N The magnetic base drill is fitted on a strong dual-coil magnet (electromagnet) with a maximum core drill capacity of 35mm. The speed is adjustable electronically between 100-830 rpm. Application: Building construction Bridge construction Ship/Marine Construction Annular cutters or twist drill bits Horizontal or overhead drilling Great for horizontal, side face and top face drilling....

50mm MAGNETIC BASE DRILL 15600N The magnetic base drill is fitted on a strong dual-coil magnet with a maximum core drill capacity of 50mm. The speed is adjustable electronically between 100-810 rpm. Application: Building construction Bridge construction Ship/Marine Construction Annular cutters or twist drill bits Horizontal or overhead drilling Great for horizontal, side face and top face drilling....

35mm MAGNETIC BASE DRILL 16000N The magnetic base drill is fitted on a permanent magnet with a maximum core drill capacity of 35mm. The speed is adjustable electronically between 100-810 rpm. Application: Building construction Bridge construction Ship/Marine Construction Annular cutters or twist drill bits Horizontal or overhead drilling Great for horizontal, side face and top face drilling....

Tork Craft Magnet & Motor Switch Set (43/45) Stand Service Kit (TCMD0035WO-SK23) At a Glance: Replacement magnet and motor switch set for the TCMD0035WO—diagram parts (43/45) for reliable holding power and dependable start/stop control. A mag base drill’s two non-negotiables are simple: the magnet must hold and the motor must respond. If either switch becomes intermittent, sticky, or unreliable, you end up with unpredictable behaviour—and that’s not just annoying, it’s unsafe...

Tork Craft Magnet and Motor Switch Set (61 63) Stand Service Kit At a Glance: Replacement magnet and motor switch set (parts 61 & 63) for safe control and dependable operation Magnetic base drills don’t do “maybe” — the magnet and motor controls need to be positive, reliable and consistent every single time. If a switch feels loose, sticks, arcs, becomes intermittent, or simply refuses to behave, it’s time to replace it before it becomes a safety problem. The Tork Craft Magnet and Motor Switch..

Tork Craft Magnet & Motor Switch Set (61/63) Stand Service Kit (TCMD0035QE-SK025) At a Glance: Replacement magnet and motor switch set for the TCMD0035QE—diagram parts (61/63) for reliable holding power and dependable start/stop control. A mag base core drill has two “must-work-every-time” controls: the magnet (for secure holding) and the motor (for predictable drilling power). If either switch becomes intermittent, sticky, or unreliable, the whole job turns into guesswork—and..

Tork Craft Main Body For Drill Stand TC04700 (TC04700B) At a Glance: Genuine replacement main body casting for the TC04700 drill stand Give your Tork Craft drill stand a second life by replacing the hard-working main body casting instead of the complete stand. This genuine TC04700B spare part is designed to match the original TC04700 drill stand for portable drills, restoring rigidity, alignment and stability when the original body has been damaged, worn or cracked through years of servi..

Tork Craft Motor & Electronics Complete Kit (10-18/31) For TC20171 Impact Wrench At a Glance: Matched motor and electronics kit for the TC20171 20V brushless impact wrench When your Tork Craft IW450 impact wrench starts to lose power, cut out or refuse to switch on, the problem is usually deep inside the motor or electronics. The TC20171-SK02 Motor & Electronics Complete Kit (10–18/31) gives you a genuine Tork Craft replacement pack that brings the main motor and control electronics toge..

Tork Craft Motor Housing Kit (31, 37-39) For TCRH0800 (TCRH0800-SK05) At a Glance: Motor housing kit covering reference parts (31 and 37–39) for the Tork Craft TCRH0800. A rotary hammer’s housing does more than keep things looking tidy—it holds the motor assembly in alignment, protects wiring and components, and keeps everything stable while vibration and impact do their thing. If the housing is cracked, warped, or the screw mounts are stripped, you can end up with loose fitment, extra vib..

Tork Craft Multi-Angle Precision Drill Guide with 10 mm Chuck At a Glance: Multi-angle drill guide with 10 mm chuck, supports 0°, 15°, 30° and 45° drilling, up to 160 mm plunge depth The Tork Craft TCV04043-1 Multi-Angle Precision Drill Guide is built for reliable, accurate drilling whether you’re working with wood, metal or pipes. Its integrated 10 mm chuck lets you mount standard drills or bits up to 10 mm, and the adjustable angle base gives you the flexibility to drill at 0°, 15°, 30° ..

Tork Craft Nibbler Attachment Set — 3-in-1 for Drill Machines (TC10016) Packaging: Boxed set (sold as each) Turn your drill into a capable sheet-metal cutting tool. The TC10016 3-in-1 nibbler attachment set provides controlled nibbling action for straight lines, gentle curves and pattern work on thin-to-medium gauge metals. Ideal for installers, fabricators and workshop users who need clean edges with minimal burr and distortion.....