Drills

Tork Craft Bearing Kit & Oil Ring (11, 14, 21) Motor Service Kit (TCMD0035-SK03) At a Glance: Bearing kit and oil ring components for motor assembly reference parts (11, 14, 21) on TCMD0035 series mag base drills. Bearings are the quiet heroes of any power tool—until they aren’t quiet anymore. If your mag base drill starts sounding rough, feeling gritty, or showing extra vibration under load, tired bearings are often the culprit. The Tork Craft TCMD0035-SK03 Bearing Kit & Oil Ring Motor Se..

GEARBOX WITH SCREWS (12/24) MOTOR SERVICE KIT....

Tork Craft Gear & Gear Cover (15, 19, 20) Motor Service Kit (TCMD0035-SK05) At a Glance: Replacement gear and gear cover components for motor assembly reference parts (15, 19, 20) on TCMD0035 series mag base drills. When your mag base drill starts sounding harsher than usual, or the drive feels inconsistent under load, the gear train is often where the story is written. Worn gear teeth and tired cover components can lead to noisy engagement, uneven power transfer, and accelerated wear. The..

Tork Craft Dove Tail Block With Screw (22, 23) Motor Service Kit (TCMD0035-SK07) At a Glance: Replacement dove tail block and screw for motor assembly reference parts (22, 23) on TCMD0035 series mag base drills. A mag base drill is only as accurate as the parts that keep everything aligned and locked in place. If the sliding action feels sloppy, the assembly won’t hold adjustment, or you’re fighting unwanted movement under load, the dovetail block area is a likely culprit. The Tork Craft T..

Tork Craft Bearing Kit For Armature (30, 32) Motor Service Kit (TCMD0035-SK08) At a Glance: Replacement armature bearing kit for motor assembly reference parts (30, 32) on TCMD0035 series mag base drills. Armature bearings do more than “just spin” — they keep the motor’s rotating core centred, stable, and efficient. Once they start wearing, you’ll often notice a rough sound, extra vibration, heat build-up, or even brush wear that seems to appear out of nowhere. The Tork Craft TCMD0035-SK08..

Tork Craft Armature (31) Motor Service Kit (TCMD0035-SK09) At a Glance: Replacement armature for motor assembly reference part (31) on TCMD0035 series mag base drills (QE/WO variants as specified). The armature is the heart of the motor—the spinning core that turns electrical power into real drilling muscle. When an armature is burnt, shorted, scored, or running out of true, the tool can lose power, run rough, spark excessively at the brushes, or trip out under load. The Tork Craft TCMD003..

Tork Craft Stator With Screws (34-37) Motor Service Kit (TCMD0035-SK10) At a Glance: Replacement stator with screws for motor assembly reference parts (34–37) on TCMD0035 series mag base drills. The stator is the motor’s powerhouse—the fixed windings that create the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, the tool can lose torque, run hot, trip out, or develop that unmistakable “electrical” smell. The Tork Craft TCMD0035-SK10 Stator ..

Tork Craft Replacement Carbon Brush (41) Motor Service Kit (TCMD0035-SK11) At a Glance: Replacement carbon brush for motor assembly reference part (41) on TCMD0035 series mag base drills. Carbon brushes are the motor’s contact point—quietly transferring power to the spinning armature while you drill through steel like it owes you money. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craf..

BRUSH HOLDER (40/42-44) MOTOR SERVICE KIT....

Tork Craft Brush Holder (40, 42-44) Motor Service Kit (TCMD0035-SK12) At a Glance: Replacement brush holder components for motor assembly reference parts (40, 42–44) on TCMD0035 series mag base drills. Carbon brushes can only do their job properly if they’re held square, guided smoothly, and kept under consistent spring pressure. If the brush holder is cracked, worn, heat-damaged, or contaminated with carbon dust and grime, you can end up with erratic brush contact, heavy sparking, and fru..

Tork Craft Housing Kit Coml. (33, 38, 39, 45, 46, 48) Motor Service Kit (TCMD0035-SK14) At a Glance: Complete housing component kit for motor assembly reference parts (33, 38, 39, 45, 46, 48) on TCMD0035 series mag base drills. The motor housing does more than “hold things together” — it keeps everything aligned, protected, and properly seated so the motor can run smoothly under load. If housings are cracked, stripped, warped, or damaged by impact and heat, you can end up with vibration, p..

Tork Craft Repl. Handle (1-3) Stand Service Kit (TCMD0035-SK15) At a Glance: Replacement handle set for stand assembly reference parts (1–3) on TCMD0035 series mag base drills. The feed handle is where precision drilling becomes human-powered—every millimetre of control comes through that grip. If the handle is loose, bent, cracked, or the mounting parts have worn, you’ll feel it immediately as sloppy feeding, reduced accuracy, and unnecessary frustration. The Tork Craft TCMD0035-SK15 Repl..