Drills

Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035-50HD-SK19) At a Glance: Replacement speed control and motor switch components for the TCMD0035-50HD—diagram parts (38 and 41–47) for stable control and dependable operation. When speed control starts hunting, cutting out, or behaving unpredictably, it’s not just frustrating—it can ruin cutters, overload the motor, and make controlled drilling far harder than it should be. The Tork Craft TCMD0035-50H..

Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035HD-SK19) At a Glance: Replacement speed control and motor switch components for the TCMD0035HD—diagram parts (38 and 41–47) for reliable control and consistent performance. If your mag base core drill starts acting “possessed”—intermittent power, erratic speed, sticky switching, or sudden cut-outs—there’s a good chance the control components are the culprits. The Tork Craft TCMD0035HD-SK19 Speed Cont..

Tork Craft Spindle & Key Set (10,13,16-18) Motor Service Kit (TCMD0035-SK02) At a Glance: Replacement spindle and key set for motor assembly reference parts (10, 13, 16–18) on TCMD0035 series mag base drills. The spindle is where the hard work gets handed over—turning motor power into reliable rotation under load. When a spindle or drive key starts wearing, you’ll often feel it as play, rough running, inconsistent drive, or premature wear on neighbouring components. The Tork Craft TCMD0035..

Tork Craft Spindle & Screw (13, 18, 21) Motor Service Kit (TCMD0068HD-SK04) At a Glance: Replacement spindle and screw components for motor assembly reference parts (13, 18, 21) on TCMD0068HD mag base drills. The spindle is the point where the motor’s power becomes precise rotation and dependable drilling. When spindle components wear, loosen, or get damaged, you can end up with rough running, increased vibration, inconsistent drive, and accelerated wear in nearby parts. The Tork Craft TCM..

Tork Craft Spindle & Screw (6, 7, 13) Motor Service Kit (TCMD0055QE-SK02) At a Glance: Replacement spindle and screw components for motor assembly reference parts (6, 7, 13) on TCMD0055QE mag base drills. The spindle is where the motor’s effort becomes real-world drilling—keeping rotation stable and transferring drive where it counts. When spindle components wear, loosen, or get damaged, the tool can develop play, rough running, inconsistent drive, or premature wear in nearby parts. The To..

Tork Craft Spindle & Screw (6/7/9/13) Motor Service Kit (TCMD0035-50HD-SK02) At a Glance: Replacement spindle and fastening components for the TCMD0035-50HD motor—diagram parts (6, 7, 9 and 13) for secure fitment and reliable drive. The spindle is the “business end” of the drive system—if it’s worn, damaged, or not secured correctly, the drill can feel rough, develop play, or lose that solid, confident power transfer. The Tork Craft TCMD0035-50HD-SK02 Spindle & Screw Motor Ser..

Tork Craft Stator With Screws (29-32) Motor Service Kit (TCMD0035-50HD-SK10) At a Glance: Replacement stator (field coil) with screws for the TCMD0035-50HD motor—diagram parts (29–32) to restore power and smooth running. The stator is the motor’s fixed “field” that makes torque possible. If it’s burnt, shorted, or damaged, the drill can lose power, run erratically, trip fuses, or simply refuse to work. The Tork Craft TCMD0035-50HD-SK10 Stator With Screws Motor Service Kit repl..

Tork Craft Stator With Screws (34-37) Motor Service Kit (TCMD0035-SK10) At a Glance: Replacement stator with screws for motor assembly reference parts (34–37) on TCMD0035 series mag base drills. The stator is the motor’s powerhouse—the fixed windings that create the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, the tool can lose torque, run hot, trip out, or develop that unmistakable “electrical” smell. The Tork Craft TCMD0035-SK10 Stator ..

Tork Craft Stator With Screws (34-37) Motor Service Kit (TCMD0068HD-SK11) At a Glance: Replacement stator with screws for motor assembly reference parts (34–37) on TCMD0068HD mag base drills. The stator is the motor’s fixed powerhouse—the windings that generate the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, you’ll often see loss of torque, excessive heat, tripping under load, or that unmistakable “electrical” smell. The Tork Craft TCMD0..

Tork Craft Stator With Screws (52-55) Motor Service Kit (TCMD0055QE-SK13) At a Glance: Replacement stator with screws for motor assembly reference parts (52–55) on TCMD0055QE mag base drills. The stator is the motor’s fixed powerhouse—the windings that create the magnetic field the armature spins inside. When a stator is overheated, shorted, or contaminated, you’ll often see loss of torque, excessive heat, tripping under load, or that tell-tale “electrical” smell. The Tork Craft TCMD0055QE..

Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper Highlights: MT2 taper, 19.05 mm inner bore, compatible with Weldon shank tools The Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper is a precisely engineered holder designed to deliver accurate, rigid clamping of tooling in lathe and milling applications. Featuring an MT2 (Morse Taper No. 2) outer taper paired with an inner bore of 19.05 mm (¾″) for Weldon shank tools, this holder enables quick and..

Tork Craft Top Mandrel Set (1-5) Stand Service Kit At a Glance: Top mandrel component set (parts 1–5) for stand service and restoration When a stand starts feeling “notchy”, develops side-play, or the feed action just doesn’t feel as precise as it used to, the top mandrel area is often where the gremlins live. The Tork Craft Top Mandrel Set (1-5) Stand Service Kit is a purpose-made spare parts set designed to replace the top mandrel components referenced as parts 1–5 in the stand assembly brea..