Electric
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK20
Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035-50HD-SK20)
At a Glance: Genuine replacement fuse for the TCMD0035-50HD—diagram part (44) for circuit protection and power restoration.
A fuse is the tool’s built-in “circuit breaker”: it sacrifices itself to protect wiring and electronics when an overload or fault occurs.
If your Tork Craft TCMD0035-50HD suddenly won’t power up, cuts out unexpectedly, or shows no signs of life, a blown fuse is a common (and thankfull..
N$ 34.70
Ex VAT:N$ 30.17
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK018
Tork Craft Repl. Handle/Pinion/Gear/Bearing (1–23) Service Kit
At a Glance: ; Replacement drive-side components covering parts 1–23 for the TCMD0055QE magnetic base drill.
When a magnetic base drill starts feeling rough, noisy, or “notchy” through the feed handle, it’s usually the drive-side parts begging for attention. This Tork Craft service kit replaces the key handle/pinion/gear/bearing components (parts 1–23) that keep the feed and drivetrain running smoothly. It’s the right move when..
N$ 2,775.23
Ex VAT:N$ 2,413.24
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK019
Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit
At a Glance: ; Replacement pinion shaft and key set covering stand parts 10-13 for the TCMD0055QE.
If the feed action on your magnetic base drill feels sloppy, uneven, or starts slipping under load, the pinion shaft and key are prime suspects. This Tork Craft Pinion Shaft & Key stand service kit (parts 10-13) is made to restore solid engagement in the feed/drive mechanism on the TCMD0055QE, helping you get back to controlled, confiden..
N$ 585.48
Ex VAT:N$ 509.11
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK020
Tork Craft Top Mandrel Set (1-5) Stand Service Kit
At a Glance: Top mandrel component set (parts 1–5) for stand service and restoration
When a stand starts feeling “notchy”, develops side-play, or the feed action just doesn’t feel as precise as it used to, the top mandrel area is often where the gremlins live. The Tork Craft Top Mandrel Set (1-5) Stand Service Kit is a purpose-made spare parts set designed to replace the top mandrel components referenced as parts 1–5 in the stand assembly brea..
N$ 205.25
Ex VAT:N$ 178.48
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK021
Tork Craft Gear, Bearing & Housing Set Complete (14-23) Stand Service Kit (TCMD0035-55QE-SK021)
At a Glance: Replacement gear, bearing and housing set for the TCMD0035-55QE stand—diagram parts (14–23) to restore smooth feed, correct engagement and solid support.
When a mag base drill stand starts feeling rough, loose or noisy, the problem is often a combination of worn gears, tired bearings and a housing that no longer supports everything tightly.
That wear shows up as backlas..
N$ 1,175.37
Ex VAT:N$ 1,022.06
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK022
Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit
At a Glance: Auto feed motor assembly replacement set (parts 31–38) for stand powered-feed servicing
Auto feed is one of those features you only truly appreciate when it stops behaving. If the powered feed becomes weak, erratic, noisy, or stops driving smoothly, the issue is often within the motor assembly and its related components. The Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit groups the parts reference..
N$ 6,214.27
Ex VAT:N$ 5,403.71
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK023
Tork Craft Circuit Board with Clamp Ring (49 50) Stand Service Kit
At a Glance: Replacement circuit board and clamp ring set (parts 49 & 50) for stand electronic control servicing
When an electronic feed system starts acting haunted — cutting in and out, refusing to respond, running inconsistently, or behaving differently each time you power up — the culprit is often the control electronics rather than the mechanical parts. The Tork Craft Circuit Board with Clamp Ring Stand Service Kit replace..
N$ 5,512.88
Ex VAT:N$ 4,793.81
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK024
Tork Craft Replacement Fuse (62) Stand Service Kit
At a Glance: Replacement fuse (part 62) for stand electrical protection and reliable operation
A fuse is the tiny hero that sacrifices itself so the expensive electronics don’t have to. When the stand’s electrical system suddenly goes dead, won’t power up, or stops responding after a surge or overload, a blown fuse is often the first (and best) thing to check. The Tork Craft Replacement Fuse (62) Stand Service Kit is a direct spare part refere..
N$ 34.70
Ex VAT:N$ 30.17
Brand: TORK CRAFT
MPN: TCMD0035-55QE-SK025
Tork Craft Magnet and Motor Switch Set (61 63) Stand Service Kit
At a Glance: Replacement magnet and motor switch set (parts 61 & 63) for safe control and dependable operation
Magnetic base drills don’t do “maybe” — the magnet and motor controls need to be positive, reliable and consistent every single time. If a switch feels loose, sticks, arcs, becomes intermittent, or simply refuses to behave, it’s time to replace it before it becomes a safety problem. The Tork Craft Magnet and Motor Switch..
N$ 101.89
Ex VAT:N$ 88.60
Brand: TORK CRAFT
MPN: TCMD0035-SK01
Tork Craft Gasket & Water Seal Compl. (1-9) Motor Service Kit (TCMD0035-SK01)
At a Glance: Complete gasket and water seal set for motor assembly parts (1-9) on TCMD0035 series mag base drills.
When coolant, swarf, and workshop grime start sneaking into places they shouldn’t, seals are usually the first suspects. The Tork Craft TCMD0035-SK01 Gasket & Water Seal Complete Motor Service Kit replaces the key sealing components referenced as parts (1–9) in the motor assembly—helping you restore ..
N$ 259.14
Ex VAT:N$ 225.34
Brand: TORK CRAFT
MPN: TCMD0035-SK02
Tork Craft Spindle & Key Set (10,13,16-18) Motor Service Kit (TCMD0035-SK02)
At a Glance: Replacement spindle and key set for motor assembly reference parts (10, 13, 16–18) on TCMD0035 series mag base drills.
The spindle is where the hard work gets handed over—turning motor power into reliable rotation under load. When a spindle or drive key starts wearing, you’ll often feel it as play, rough running, inconsistent drive, or premature wear on neighbouring components. The Tork Craft TCMD0035..
N$ 1,565.20
Ex VAT:N$ 1,361.04
Brand: TORK CRAFT
MPN: TCMD0035-SK03
Tork Craft Bearing Kit & Oil Ring (11, 14, 21) Motor Service Kit (TCMD0035-SK03)
At a Glance: Bearing kit and oil ring components for motor assembly reference parts (11, 14, 21) on TCMD0035 series mag base drills.
Bearings are the quiet heroes of any power tool—until they aren’t quiet anymore. If your mag base drill starts sounding rough, feeling gritty, or showing extra vibration under load, tired bearings are often the culprit. The Tork Craft TCMD0035-SK03 Bearing Kit & Oil Ring Motor Se..
N$ 267.26
Ex VAT:N$ 232.40