Electric
Brand: TORK CRAFT
MPN: TCID0850-SK08
Tork Craft Brush Holder Set (24/25) Service Kit For TCID0850
At a Glance: Replacement brush holder set (parts 24 and 25) for the Tork Craft TCID0850 impact driver
Fresh carbon brushes are only half the story—if the brush holders are cracked, worn, or letting the brushes bind, the motor won’t get clean contact and performance can drop fast. The Tork Craft TCID0850-SK08 Brush Holder Set service kit replaces the brush holder components (parts 24 and 25), restoring proper brush alignment and s..
N$ 13.78
Ex VAT:N$ 11.98
Brand: TORK CRAFT
MPN: TCID0850-SK09
Tork Craft Repl. Trigger Compl. Kit (26-28) Service Kit For TCID0850
At a Glance: Replacement trigger complete kit (parts 26–28) for the Tork Craft TCID0850 impact driver
A worn trigger turns a perfectly good impact driver into a temperamental gremlin—starts and stops when it feels like it, has dead spots, or refuses to hold a steady speed. The Tork Craft TCID0850-SK09 Repl. Trigger Compl. kit replaces the trigger components (parts 26–28), restoring proper control response and more dependa..
N$ 180.54
Ex VAT:N$ 156.99
Brand: TORK CRAFT
MPN: TCID0850-SK10
Tork Craft Repl. Cable & Sheath (29/30) Service Kit For TCID0850
At a Glance: Replacement cable and protective sheath components (parts 29 and 30) for the Tork Craft TCID0850 impact driver
Cables live a hard life in the workshop—flexed, pulled, snagged, and sometimes “repaired” with tape and hope. If your impact driver’s cable is damaged or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID0850-SK10 Repl. Cable & Sheath service ..
N$ 97.16
Ex VAT:N$ 84.49
Brand: TORK CRAFT
MPN: TCID0850-SK11
Tork Craft Housing L/R With Screws (31/33) Service Kit For TCID0850
At a Glance: Replacement left and right housing with screws (parts 31 and 33) for the Tork Craft TCID0850 impact driver
An impact driver’s housing does a lot more than look pretty. It protects the motor and wiring, supports internal components, and gives you the grip and structure needed to control the tool under repeated impact loads. If your TCID0850 housing is cracked, stripped at the screw bosses, or no longer closing ..
N$ 183.30
Ex VAT:N$ 159.39
Brand: TORK CRAFT
MPN: TCID0850-SK12
Tork Craft Auxilary Handle Compl. With Rod (34-39) Service Kit For TCID0850
At a Glance: Auxilary handle complete with rod service kit (parts 34–39) for improved control on the Tork Craft TCID0850
When an impact drill/driver starts working hard, the torque can twist the tool in your hands—and that’s where an auxiliary handle earns its keep. If your handle is missing, cracked, stripped, or the rod/clamp parts are worn, you lose control and comfort fast. The Tork Craft TCID0850-SK12 Auxilary..
N$ 103.36
Ex VAT:N$ 89.88
Brand: TORK CRAFT
MPN: TCID1100-SK01
Tork Craft Output Shaft & Bearing Compl. (3-6/9) Service Kit For TCID1100
At a Glance: Output shaft and bearing complete assembly (parts 3–6 and 9) for the Tork Craft TCID1100
If your impact tool starts feeling rough, noisy, or develops play at the output, the output shaft and bearing area is often where the trouble lives. These components carry load, keep alignment true, and transfer torque from the gearbox to the bit. The Tork Craft TCID1100-SK01 Output Shaft & Bearing Compl. service kit..
N$ 139.20
Ex VAT:N$ 121.04
Brand: TORK CRAFT
MPN: TCID1100-SK02
Tork Craft Gearbox Housing With Screws (7/8) Service Kit For TCID1100
At a Glance: Replacement gearbox housing with screws (parts 7 and 8) for the Tork Craft TCID1100
The gearbox housing is the structural cradle that keeps the gears aligned and protected while the tool delivers torque and impact forces. If the housing is cracked, stripped, or no longer seating correctly, the gearbox can develop play, noise and premature wear. The Tork Craft TCID1100-SK02 Gearbox Housing With Screws service..
N$ 133.68
Ex VAT:N$ 116.24
Brand: TORK CRAFT
MPN: TCID1100-SK03
Tork Craft Gear Selector Knob Compl. (11-15) Service Kit For TCID1100
At a Glance: Gear selector knob complete assembly (parts 11–15) for the Tork Craft TCID1100
When the gear selector starts slipping, sticking, or won’t engage properly, you lose the ability to match speed and torque to the job—meaning more strain on the tool and less control for you. The Tork Craft TCID1100-SK03 Gear Selector Knob Compl. service kit replaces the gear selector components (parts 11–15), restoring positive s..
N$ 17.92
Ex VAT:N$ 15.58
Brand: TORK CRAFT
MPN: TCID1100-SK04
Tork Craft Gear Set With Bearing Compl. (16-25) Service Kit For TCID1100
At a Glance: Gear set with bearing complete assembly (parts 16–25) for the Tork Craft TCID1100 gearbox
When a gearbox starts grinding, slipping, or sounding “dry and unhappy,” it’s usually because the gears and bearings that carry load are worn, damaged, or contaminated. The Tork Craft TCID1100-SK04 Gear Set With Bearing Compl. service kit replaces the key gearbox drive components (parts 16–25), restoring proper engag..
N$ 268.74
Ex VAT:N$ 233.69
Brand: TORK CRAFT
MPN: TCID1100-SK05
Tork Craft Imp. Selector Knob & Change Over Plate (26-28) Service Kit For TCID1100
At a Glance: Replacement selector knob and change-over plate kit (parts 26–28) for forward/reverse control on the Tork Craft TCID1100
Forward/reverse selection should feel definite—click, engage, done. If your TCID1100 selector is loose, sticky, or won’t shift cleanly, you can end up with partial engagement (which is the mechanical version of “maybe”) and that’s bad for control and for internal parts. The To..
N$ 79.94
Ex VAT:N$ 69.51
Brand: TORK CRAFT
MPN: TCID1100-SK06
Tork Craft Intermediate Spindle & Helical Gear Kit (29-34) Service Kit For TCID1100
At a Glance: Intermediate spindle and helical gear kit (parts 29–34) for the Tork Craft TCID1100 gearbox drive train
Inside the TCID1100 gearbox, the intermediate spindle and helical gear components do the heavy lifting of transferring power smoothly through the gear train. When these parts wear, you’ll often notice extra noise, rough running, slipping under load, or that “gritty” feel that suggests the gea..
N$ 135.06
Ex VAT:N$ 117.44
Brand: TORK CRAFT
MPN: TCID1100-SK07
Tork Craft Armature & Bearing Kit (38-40) Service Kit For TCID1100
At a Glance: Replacement armature and bearing kit (parts 38–40) for the Tork Craft TCID1100 motor
The armature is the spinning engine inside your impact drill/driver, and its bearings are what keep that rotation smooth and stable. When the armature is damaged—or bearings start to rumble—the tool can lose power, run hot, spark excessively, and develop that rough “something’s not right” feel. The Tork Craft TCID1100-SK07 Arma..
N$ 403.80
Ex VAT:N$ 351.13