Electric
Brand: TORK CRAFT
MPN: TCID1100-SK08
Tork Craft Imp. Drill Stator (41) Service Kit For TCID1100
At a Glance: Replacement stator (part 41) service kit for the Tork Craft TCID1100 motor
The stator is the stationary half of the motor that creates the magnetic field your tool needs to make torque. When stator windings are damaged, burnt, or shorted, the symptoms are usually loud and clear: reduced power, overheating, intermittent running, tripping, and that tell-tale “electrical” smell. The Tork Craft TCID1100-SK08 Imp. Drill Sta..
N$ 330.76
Ex VAT:N$ 287.62
Brand: TORK CRAFT
MPN: TCID1100-SK09
Tork Craft Brush Holder Set (42/44-46) Service Kit For TCID1100
At a Glance: Replacement brush holder set (parts 42 and 44–46) for the Tork Craft TCID1100 motor
Carbon brushes can only do their job if they slide freely and stay correctly aligned against the commutator. If the brush holders are cracked, heat-damaged, worn, or packed with carbon dust, brushes can bind or sit skew—causing weak power, intermittent running and excessive sparking. The Tork Craft TCID1100-SK09 Brush Holder Set se..
N$ 37.21
Ex VAT:N$ 32.36
Brand: TORK CRAFT
MPN: TCID1100-SK10
Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100
At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor
Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..
N$ 15.16
Ex VAT:N$ 13.18
Brand: TORK CRAFT
MPN: TCID1100-SK11
Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100
At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver
When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..
N$ 165.38
Ex VAT:N$ 143.81
Brand: TORK CRAFT
MPN: TCID1100-SK12
Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100
At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100
Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry point, or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ..
N$ 143.32
Ex VAT:N$ 124.63
Brand: TORK CRAFT
MPN: TCID1100-SK13
Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100
At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100
The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw points, or no longer closing properly, the tool can ..
N$ 97.85
Ex VAT:N$ 85.09
Brand: TORK CRAFT
MPN: TCID1100-SK14
Tork Craft Auxilary Handle Compl. With Rod (57-61) Service Kit For TCID1100
At a Glance: Auxilary handle complete with rod service kit (parts 57–61) for improved control on the Tork Craft TCID1100
When torque ramps up, an impact drill/driver can try to twist itself out of your hands—especially on larger fasteners or heavier drilling. An auxiliary handle gives you the extra leverage and stability needed to stay in control and work more comfortably. If your original handle is missing, cracke..
N$ 115.77
Ex VAT:N$ 100.67
Brand: TORK CRAFT
MPN: TCID1100-SK15
Tork Craft Impact Drill 220V 1100W Rebuild Tool Kit
At a Glance: Comprehensive rebuild kit for the Tork Craft TCID1100 impact drill (220V, 1100W)
Some tools don’t need replacing—they need rebuilding. The Tork Craft TCID1100-SK15 Impact Drill 220V 1100W Rebuild Tool kit is the “reset button” for a hardworking TCID1100 that’s been through the wars. Instead of chasing faults one part at a time, this rebuild kit is designed as a complete refurbishment solution to restore performance, control a..
N$ 1,984.56
Ex VAT:N$ 1,725.70
Brand: TORK CRAFT
MPN: TCMD001
Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper
Highlights: MT2 taper, 19.05 mm inner bore, compatible with Weldon shank tools
The Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper is a precisely engineered holder designed to deliver accurate, rigid clamping of tooling in lathe and milling applications. Featuring an MT2 (Morse Taper No. 2) outer taper paired with an inner bore of 19.05 mm (¾″) for Weldon shank tools, this holder enables quick and..
N$ 1,406.46
Ex VAT:N$ 1,223.01
Brand: TORK CRAFT
MPN: TCMD002
Tork Craft Chuck Adaptor 19.05 mm × ½″ × 20 UNF Weldon Shank
Highlights: 19.05 mm (¾″) inner bore × ½″-20 UNF thread, Weldon shank mount
The Tork Craft Chuck Adaptor 19.05 mm × ½″ × 20 UNF Weldon Shank is engineered to bridge your Weldon-shank tooling to
standard ½″-20 UNF threaded chucks. With a precise 19.05 mm bore and robust Weldon-shank interface, this adaptor provides secure clamping, excellent
concentricity and reliable performance for lathe, milling and drilling applications.
>..
N$ 301.65
Ex VAT:N$ 262.30
Brand: TORK CRAFT
MPN: TCMD004
Tork Craft Drift Key ½″
Highlights: ½″ square drive key, hardened steel construction, designed for safe removal of pulleys and assemblies
The Tork Craft Drift Key ½″ (TCMD004) is a high-quality, workshop-grade removal tool crafted for mechanics and technicians who routinely service pulleys, retainer rings, hubs and other pressed or secured components. Featuring a robust ½″ square drive interface, this drift key fits standard sockets or breaker bars, making it easy to apply torque for safe and ..
N$ 105.40
Ex VAT:N$ 91.65
Brand: TORK CRAFT
MPN: TCDM0035PM-SK22
Tork Craft Control Panel & Motor Switch (34/37/38) Stand Service Kit
At a Glance: Replacement control panel and motor switch components (parts 34, 37 and 38) for the Tork Craft TCDM0035PM stand
When a stand’s controls start acting up—intermittent switching, inconsistent starts, or a switch that feels “tired” and unpredictable—your entire setup becomes the weak link. The Tork Craft TCDM0035PM-SK22 Control Panel & Motor Switch service kit replaces the key control and switching components (pa..
N$ 679.97
Ex VAT:N$ 591.28