Electric
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK08
Tork Craft Armature (26) Motor Service Kit (TCMD0035-50HD-SK08)
At a Glance: Replacement armature for the TCMD0035-50HD motor—diagram part (26) to restore power, smooth running and reliable performance.
The armature is the motor’s spinning powerhouse—when it’s healthy, the drill runs smooth and strong. When it’s damaged, everything changes:
weak power, heavy sparking at the brushes, burning smell, rough running, or a motor that simply won’t start.
The Tork Craft TCMD0035-..
N$ 1,760.11
Ex VAT:N$ 1,530.53
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK09
Tork Craft Housing Kit Complete (28/33/34/39/41-43) Motor Service Kit (TCMD0035-50HD-SK09)
At a Glance: Replacement motor housing component kit for the TCMD0035-50HD—diagram parts (28, 33, 34, 39 and 41–43) to restore fitment, support and protection.
Motor housings do more than just “cover the parts”. They keep everything aligned, hold bearings and components in the correct position, protect wiring, and shield the motor from dust, slurry and impact.
If a housing cracks, strips..
N$ 1,224.84
Ex VAT:N$ 1,065.08
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK10
Tork Craft Stator With Screws (29-32) Motor Service Kit (TCMD0035-50HD-SK10)
At a Glance: Replacement stator (field coil) with screws for the TCMD0035-50HD motor—diagram parts (29–32) to restore power and smooth running.
The stator is the motor’s fixed “field” that makes torque possible. If it’s burnt, shorted, or damaged, the drill can lose power, run erratically, trip fuses, or simply refuse to work.
The Tork Craft TCMD0035-50HD-SK10 Stator With Screws Motor Service Kit repl..
N$ 1,379.89
Ex VAT:N$ 1,199.90
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK11
Tork Craft Replacement Carbon Brush (36) Motor Service Kit (TCMD0035-50HD-SK11)
At a Glance: Replacement carbon brush for the TCMD0035-50HD motor—diagram part (36) to restore stable electrical contact and smooth running.
Carbon brushes are the motor’s “power hand-off”: they transfer electricity to the spinning commutator so the armature can do its job.
As brushes wear down, you may notice loss of power, erratic running, increased sparking, or a motor that cuts out under load.
..
N$ 110.75
Ex VAT:N$ 96.30
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK12
Tork Craft Brush Holder (35/37/38) Motor Service Kit (TCMD0035-50HD-SK12)
At a Glance: Replacement brush holder components for the TCMD0035-50HD motor—diagram parts (35, 37 and 38) for secure brush guidance and stable commutator contact.
Carbon brushes can only do their job properly if they’re held straight, tensioned correctly, and kept in clean contact with the commutator.
If the brush holder is cracked, heat-damaged, loose, or worn, you can get poor contact, heavy sparking,..
N$ 417.88
Ex VAT:N$ 363.37
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK13
Tork Craft Coolant Bottle With Cap (1/2) Stand Service Kit (TCMD0035-50HD-SK13)
At a Glance:; Replacement coolant bottle with cap for the TCMD0035-50HD—diagram parts (1/2) for cleaner, more reliable wet drilling.
Wet drilling is brilliant… right up until the coolant bottle starts leaking, the cap won’t seal, or the bottle gets damaged and you end up with more mess than cooling.
The Tork Craft TCMD0035-50HD-SK13 Coolant Bottle With Cap Stand Service Kit replaces the components ..
N$ 98.93
Ex VAT:N$ 86.03
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK14
Tork Craft Coolant Valve With Pipe & Coupling (3/4/5) Stand Service Kit (TCMD0035-50HD-SK14)
At a Glance: Replacement coolant valve assembly with pipe and coupling for the TCMD0035-50HD—diagram parts (3/4/5) for reliable flow control during wet drilling.
Coolant is only useful if you can control it. A stuck valve, leaking coupling, or cracked pipe quickly turns “nice clean cooling” into “why is my bench a swimming pool?”
The Tork Craft TCMD0035-50HD-SK14 Coolant Valve With Pip..
N$ 249.55
Ex VAT:N$ 217.00
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK15
Tork Craft Bearing & Gear Set (18-23) Stand Service Kit (TCMD0035-50HD-SK15)
At a Glance: Replacement bearing and gear set for the TCMD0035-50HD stand—diagram parts (18–23) to restore smooth feed and reliable engagement.
A mag base drill stand should feel solid and smooth: controlled feed, predictable engagement, and no “crunchy” surprises when you wind the handle.
When bearings wear or gears start to round off, you’ll notice rough travel, extra play, noisy operation, or incon..
N$ 451.84
Ex VAT:N$ 392.90
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK16
Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035-50HD-SK16)
At a Glance: Replacement pinion shaft and key for the TCMD0035-50HD stand—diagram parts (24/25) for positive drive and smooth feed control.
The pinion shaft is a small part with a big job: it transfers your handle input into controlled feed movement through the stand’s gear system.
If the shaft is worn or the key is damaged, you can get slipping, uneven feed, extra play, or that nasty “jump” feeling t..
N$ 345.53
Ex VAT:N$ 300.46
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK17
Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035-50HD-SK17)
At a Glance: Replacement feed handle kit for the TCMD0035-50HD stand—diagram parts (26–28) for comfortable grip and positive feed control.
A feed handle is where you and the machine meet. If it’s cracked, loose, bent, or missing, you lose control and the stand becomes awkward (and unsafe) to operate—especially under load.
The Tork Craft TCMD0035-50HD-SK17 Replacement Handle Stand Service Kit replaces ..
N$ 511.65
Ex VAT:N$ 444.91
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK18
Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035-50HD-SK18)
At a Glance: Replacement panel plate with screws for the TCMD0035-50HD stand—diagram parts (36, 37, 39, 40 and 48) for secure mounting and proper protection.
The panel plate does two important jobs: it keeps the control area properly protected and it holds components in the correct position so everything lines up, fits neatly, and stays secure under vibration.
If the plate is cracked, be..
N$ 691.78
Ex VAT:N$ 601.55
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK19
Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035-50HD-SK19)
At a Glance: Replacement speed control and motor switch components for the TCMD0035-50HD—diagram parts (38 and 41–47) for stable control and dependable operation.
When speed control starts hunting, cutting out, or behaving unpredictably, it’s not just frustrating—it can ruin cutters, overload the motor, and make controlled drilling far harder than it should be.
The Tork Craft TCMD0035-50H..
N$ 1,861.99
Ex VAT:N$ 1,619.12