Spindle Cutters

Spindle cutter - 3 lip classic bead   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut quarter rounds and coves KP800020 - 3/4" - 1/2" spacer rings     Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Quarter round 5/16" and Cove 1/2"   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut quarter rounds and coves KP800020 - 3/4" - 1/2" spacer rings     Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Quarter round 1/4" and 1/2"   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut quarter rounds KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Quarter round 3/8" and Bead 1/4"   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut quarter rounds and beads KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Cove 3/4"   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut coves, flutes or beads. KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Glue joint (single F-joint)   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint. KP800020 - 3/4" - 1/2" space..

Spindle cutter - Ogee   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut ogee profiles. KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Straight/Slot/Rabbet 3/4" Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut grooves/slots and rebates. KP800020 - 3/4" - 1/2" spacer rings Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Wedge Groove   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter is used to make a tongue and groove and matches up with KP12 KP800020 - 3/4" - 1/2" spacer rings Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Wedge Tongue   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter is used to make a tongue and groove and matches up with KP13 KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spindle shaft.....

Spindle cutter - Full bead/Half round/Bull nose 3/4"   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter can be configured to cut full beads, half rounds or a bull nose. KP800020 - 3/4" - 1/2" spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2" or 3/4" spin..

Spindle cutter - Ogee lip   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft. The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The ogeevprofile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint. KP800020 - 3/4" - 1/2" spacer rings I..