PRO-TECH

The solution for installing knobs and pulls easily with repeatable accuracy The Pro-Tech Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs, handles and pulls. The moveable edge guide and measuring scales make it easy to position knobs accurately, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new cabinet construction and for rooms a fresh look on cabinet doors and drawers. Whether updating cabi..

Cabinet door set 2 PC   Cabinet door set - Ogee profile The set is designed to be used in a router table to create a cabinet door. Rail & stile profile router bits Panel raise router bit....

Spindle cutter - 3 lip classic bead   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut quarter rounds and coves KP800020 - 3/4' - 1/2' spacer rings     Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Quarter round 5/16' and Cove 1/2'   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut quarter rounds and coves KP800020 - 3/4' - 1/2' spacer rings     Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Quarter round 1/4' and 1/2'   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut quarter rounds KP800020 - 3/4' - 1/2' spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Quarter round 3/8' and Bead 1/4'   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut quarter rounds and beads KP800020 - 3/4' - 1/2' spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Cove 3/4'   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut coves, flutes or beads. KP800020 - 3/4' - 1/2' spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Glue joint (single F-joint)   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint. KP800020 - 3/4' - 1/2' space..

Spindle cutter - Ogee   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut ogee profiles. KP800020 - 3/4' - 1/2' spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Straight/Slot/Rabbet 3/4' Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter can be configured to cut grooves/slots and rebates. KP800020 - 3/4' - 1/2' spacer rings Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Wedge Groove   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter is used to make a tongue and groove and matches up with KP12 KP800020 - 3/4' - 1/2' spacer rings Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....

Spindle cutter - Wedge Tongue   Tungsten Carbide - 3 wing The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft. The cutter is used to make a tongue and groove and matches up with KP13 KP800020 - 3/4' - 1/2' spacer rings   Important: Make sure the spindle moulder has a table opening of at least Ø 140mm. Designed for spindle moulders equipped with either a 1/2' or 3/4' spindle shaft.....