Spare Parts

Spare Screw for Router Bits This is an affordable router bit range that is well supported throughout South Africa. All our Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRAND in most retail stores. At a glance: Spare screw for holding the bearing in place on our Tork Craft router bit range.....

Grub screw (short) 2.4mm   Grub screw The grub screw is used to hold the bearing to the router bit. Make sure that the washer is fitted between the grub screw and the bearing.....

Grub screw (long) 2.4mm   Grub screw The grub screw is used to hold the bearing to the router bit. Make sure that the washer is fitted between the grub screw and the bearing.....

Retaining collar for 1/4' shaft router bits   Retaining collar The retaining collar is used to secure a bearing with an internal diameter Ø 1/4' to a 1/4' shaft router bit. Secure the retaining collar by tightening the supplied grub screw.....

Retaining collar for 1/2' shaft router bits   Retaining collar The retaining collar is used to secure a bearing with an internal diameter Ø 1/2' to a 1/2' shaft router bit. Secure the retaining collar by tightening the supplied grub screw.....

Router bit spare parts pack   Spare parts included Allen key Bearing ID 3/16' x OD 1/2' - KP100 1-2 Bearing ID 3/16' x OD 3/8' - KP100 3-8 Grub screw - KP GRUB Dust seal for 1/2' bearing Dust seal for 3/8' bearing....

Half Round Bull Nose Bit   Carbide Tipped This router bit is used for creating a convex shaped profile on the side of the workpiece in one pass producing a perfect half radius bull nose profile Design helps minimize kickback Smooth edge requires little or no sanding before applying finish This router bit has a 12,7 mm shank (shaft) that will fit most large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into..

Half Round Bull Nose Bit   Carbide Tipped This router bit is used for creating a convex shaped profile on the side of the workpiece in one pass producing a perfect half radius bull nose profile Design helps minimize kickback Smooth edge requires little or no sanding before applying finish This router bit has a 12,7 mm shank (shaft) that will fit most large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into you..

SLOT CUTTER 4MM FOR KP551 OR KP851....

Spare cutter   Router bit spare part This ogee cutter cuts 12.7mm instead of the 9.5mm standard and is compatible with KP551 and KP851.....

Spare cutter   Router bit spare part This ogee cutter cuts 9.5mm and is the standard cutter supplied with KP551 and KP851.....