Router Bits
Brand: PRO-TECH
MPN: KP532411
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment during assembly and adds
a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit mo..
N$ 1,545.26
Ex VAT:N$ 1,343.70
Brand: PRO-TECH
MPN: KP53800
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This router bit is a one-pass cutter. Best results will be achieved in a router table
setup. Great results can also be achieved using template-guide equipped handheld routers.
This router bit h..
N$ 532.80
Ex VAT:N$ 463.30
Brand: PRO-TECH
MPN: KP53802
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This router bit is a one-pass cutter. Best results will be achieved in a router table
setup. or a using template-guide equipped handheld router.
This router bit has a
6.35 mm shank (shaft) that..
N$ 826.33
Ex VAT:N$ 718.55
Brand: PRO-TECH
MPN: KP542411
V - paneling Tongue & Groove router bit
Carbide
Tipped - Tongue & Groove (V-paneling)
The cutter is used for joining paneling to form a 'V' groove. Great for
ceilings.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
To cut the tongue, remove the slot cutt..
N$ 2,162.52
Ex VAT:N$ 1,880.45
Brand: PRO-TECH
MPN: KP542411-1
REPLACEMENT 3.2MM CUTTER FOR THE V JOINT TONGUE & GROOVE ASSE....
N$ 441.43
Ex VAT:N$ 383.85
Brand: PRO-TECH
MPN: KP546
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most
..
N$ 1,398.86
Ex VAT:N$ 1,216.40
Brand: PRO-TECH
MPN: KP5503
Face
Mould router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
profile, or just a portion of it to achieve the look you want.
The timber is held securely against the bearing and the bit makes the cut. This
leaves you free to feed the timber steadily - and yo..
N$ 1,463.78
Ex VAT:N$ 1,272.85
Brand: PRO-TECH
MPN: KP551
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most small and large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
Take care when working with end grain. A s..
N$ 1,335.15
Ex VAT:N$ 1,161.00
Brand: PRO-TECH
MPN: KP551-1
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
N$ 228.62
Ex VAT:N$ 198.80
Brand: PRO-TECH
MPN: KP551-3
Spare cutter
Router
bit spare part
This ogee cutter cuts 12.7mm instead of the 9.5mm standard and is compatible
with
KP551 and
KP851.....
N$ 471.44
Ex VAT:N$ 409.95
Brand: PRO-TECH
MPN: KP551-4
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
N$ 273.47
Ex VAT:N$ 237.80