Router Bits
Brand: PRO-TECH
MPN: KP99
Cabinet
door set 2 PC
Cabinet door set - Ogee profile
The set is designed to be used in a router table to create a cabinet door.
Rail & stile profile router bits
Panel raise router bit....
N$ 3,979.58
Ex VAT:N$ 3,460.50
Brand: PRO-TECH
MPN: KP708010
Spindle
cutter - 3 lip classic bead
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and coves
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,856.68
Ex VAT:N$ 1,614.50
Brand: PRO-TECH
MPN: KP9
Spindle
cutter - Quarter round 5/16' and Cove 1/2'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and coves
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,723.85
Ex VAT:N$ 1,499.00
Brand: PRO-TECH
MPN: KP17
Spindle
cutter - Quarter round 1/4' and 1/2'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,239.70
Ex VAT:N$ 1,078.00
Brand: PRO-TECH
MPN: KP10
Spindle
cutter - Quarter round 3/8' and Bead 1/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and beads
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,083.30
Ex VAT:N$ 942.00
Brand: PRO-TECH
MPN: KP2
Spindle
cutter - Cove 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut coves, flutes or beads.
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,658.88
Ex VAT:N$ 1,442.50
Brand: PRO-TECH
MPN: KP19
Spindle
cutter - Glue joint (single F-joint)
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
KP800020 - 3/4' - 1/2' space..
N$ 1,924.53
Ex VAT:N$ 1,673.50
Brand: PRO-TECH
MPN: KP18
Spindle
cutter - Ogee
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ogee profiles.
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,458.78
Ex VAT:N$ 1,268.50
Brand: PRO-TECH
MPN: KP20
Spindle
cutter - Straight/Slot/Rabbet 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut grooves/slots and rebates.
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,458.78
Ex VAT:N$ 1,268.50
Brand: PRO-TECH
MPN: KP13
Spindle
cutter - Wedge Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP12
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,325.95
Ex VAT:N$ 1,153.00
Brand: PRO-TECH
MPN: KP12
Spindle
cutter - Wedge Tongue
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP13
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,393.80
Ex VAT:N$ 1,212.00
Brand: PRO-TECH
MPN: KP570811
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
PRO-TECH
router bits are manufactured in Taiwan.....
N$ 457.70
Ex VAT:N$ 398.00