Router Bits
Brand: PRO-TECH
MPN: KP800020
Spacer
bushings
Spindle moulder cutter spacers
Use the spacer bushings to adapt a Ø 3/4' bore cutter to fit on a Ø
1/2' bore spindle shaft.....
N$ 58.42
Ex VAT:N$ 50.80
Brand: PRO-TECH
MPN: KP801
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom groove is desired. Using an edge guide, a core box router bit can cut coves.
Other
uses include:
Reeding
Fluiting
Veining
Grooving
General ornamentation
This router b..
N$ 213.15
Ex VAT:N$ 185.35
Brand: PRO-TECH
MPN: KP802
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom groove is desired. Using an edge guide, a core box router bit can cut coves.
Other
uses include:
Reeding
Fluiting
Veining
Grooving
General ornamentation
This router b..
N$ 265.02
Ex VAT:N$ 230.45
Brand: PRO-TECH
MPN: KP803
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom groove is desired. Using an edge guide, a core box router bit can cut coves.
Other
uses include:
Reeding
Fluiting
Veining
Grooving
General ornamentation
This router b..
N$ 281.58
Ex VAT:N$ 244.85
Brand: PRO-TECH
MPN: KP804
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom groove is desired. Using an edge guide, a core box router bit can cut coves.
Other
uses include:
Reeding
Fluiting
Veining
Grooving
General ornamentation
This router b..
N$ 379.79
Ex VAT:N$ 330.25
Brand: PRO-TECH
MPN: KP805
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom groove is desired. Using an edge guide, a core box router bit can cut coves.
Other
uses include:
Reeding
Fluiting
Veining
Grooving
General ornamentation
This router b..
N$ 526.64
Ex VAT:N$ 457.95
Brand: PRO-TECH
MPN: KP831010
Spindle
cutter - Ogee lip
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The ogeevprofile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
KP800020 - 3/4' - 1/2' spacer rings
I..
N$ 1,526.11
Ex VAT:N$ 1,327.05
Brand: PRO-TECH
MPN: KP846
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most la..
N$ 1,521.05
Ex VAT:N$ 1,322.65
Brand: PRO-TECH
MPN: KP848
Lock Mitre router bit
for strongh box joints
The lock-mitre cutter makes extremely strong mitred corner
joints. Various applications for this joint type include wooden
pillars, boxes and extremely strong drawers. The lock mitre joint is an improvement
over standard mitre joints in box construction. The interlocking
joint guarantees an accurate fi t and the increased gluing area
means a stronger joint.
This router bit has a
12,7mm shank (shaft) that will fit large routers..
N$ 1,526.11
Ex VAT:N$ 1,327.05
Brand: PRO-TECH
MPN: KP851
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
Take care when working with end grain. A sacrificial..
N$ 1,258.96
Ex VAT:N$ 1,094.75
Brand: PRO-TECH
MPN: KP851-1
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP851
Bearing KP551-6 is included.....
N$ 202.80
Ex VAT:N$ 176.35