Router Bits
Brand: PRO-TECH
MPN: KP863060
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the rail & stile cutters. For example: Kitchen cabinet doors.
KP800020 - 3/4" - 1/2" spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed fo..
N$ 2,566.80
Ex VAT:N$ 2,232.00
Brand: PRO-TECH
MPN: KP689
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A ty..
N$ 1,646.23
Ex VAT:N$ 1,431.50
Brand: PRO-TECH
MPN: KP863120
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 1 1/4" or 30mm diameter spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the rail & stile cutters. For example: Kitchen cabinet doors.
The cutter includes a 1 1/4" - 30mm spacer bush.
Important:
Make sure the spindle moulder has a table opening of at least Ø
..
N$ 2,852.58
Ex VAT:N$ 2,480.50
Brand: PRO-TECH
MPN: KP404441
Panel Raiser - Double Cove router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the d..
N$ 1,996.40
Ex VAT:N$ 1,736.00
Brand: PRO-TECH
MPN: KP402441
Panel Raiser-Wavy router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A ty..
N$ 1,568.60
Ex VAT:N$ 1,364.00
Brand: PRO-TECH
MPN: KP3801
Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A typical..
N$ 1,239.13
Ex VAT:N$ 1,077.50
Brand: PRO-TECH
MPN: KP122441
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 814.20
Ex VAT:N$ 708.00
Brand: PRO-TECH
MPN: KP152007
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 330.63
Ex VAT:N$ 287.50
Brand: PRO-TECH
MPN: KP122009
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 340.40
Ex VAT:N$ 296.00
Brand: PRO-TECH
MPN: KP122421
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 722.78
Ex VAT:N$ 628.50
Brand: PRO-TECH
MPN: KP213041
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over with a ½ inch radius.
Rounded
edges give a project a softer, smoother look. The greater the radius of the round-over,
the more pronounced this effect becomes. By extending the bit slightly a ..
N$ 662.98
Ex VAT:N$ 576.50
Brand: PRO-TECH
MPN: KP213011
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over with a ½ inch radius.
Rounded
edges give a project a softer, smoother look. The greater the radius of the round-over,
the more pronounced this effect becomes. By extending the bit slightly a ..
N$ 515.20
Ex VAT:N$ 448.00