Power Tools

Tork Craft Repl. Handle (19-22) Stand Service Kit (TCMD0068HD-SK19) At a Glance: Replacement handle components for stand reference parts (19–22) on TCMD0068HD mag base drills. The feed handle is where you and the machine meet. If the handle is bent, cracked, slipping, or loose, you lose control—making drilling less accurate and a lot less safe. The Tork Craft TCMD0068HD-SK19 Replacement Handle Stand Service Kit replaces the handle components referenced as parts (19–22), helping restore smo..

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035-50HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035-50HD stand—diagram parts (26–28) for comfortable grip and positive feed control. A feed handle is where you and the machine meet. If it’s cracked, loose, bent, or missing, you lose control and the stand becomes awkward (and unsafe) to operate—especially under load. The Tork Craft TCMD0035-50HD-SK17 Replacement Handle Stand Service Kit replaces ..

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035HD stand—diagram parts (26–28) for smooth, controlled drilling feed. The handle is where your control lives. If it’s bent, cracked, slipping, or just plain uncomfortable, your drilling accuracy and safety take a knock. The Tork Craft TCMD0035HD-SK17 Replacement Handle Stand Service Kit replaces the components referenced as parts (26–28), resto..

Tork Craft Repl. Handle/Pinion/Gear/Bearing (1–23) Service Kit At a Glance: ; Replacement drive-side components covering parts 1–23 for the TCMD0055QE magnetic base drill. When a magnetic base drill starts feeling rough, noisy, or “notchy” through the feed handle, it’s usually the drive-side parts begging for attention. This Tork Craft service kit replaces the key handle/pinion/gear/bearing components (parts 1–23) that keep the feed and drivetrain running smoothly. It’s the right move when..

Tork Craft Repl. MT2 Taper Shaft (7) Service Kit (TCMD0068HD-SK02) At a Glance: Replacement MT2 taper shaft for reference part (7) on TCMD0068HD mag base drills. A mag base drill is only as accurate as the interface that holds the tool. If the taper shaft is worn, scored, or no longer grips correctly, you can get slipping, run-out, poor hole finish, and tool ejection risks—none of which are fun surprises on a steel job. The Tork Craft TCMD0068HD-SK02 Replacement MT2 Taper Shaft replaces th..

Tork Craft Repl. Trigger Compl. Kit (26-28) Service Kit For TCID0850 At a Glance: Replacement trigger complete kit (parts 26–28) for the Tork Craft TCID0850 impact driver A worn trigger turns a perfectly good impact driver into a temperamental gremlin—starts and stops when it feels like it, has dead spots, or refuses to hold a steady speed. The Tork Craft TCID0850-SK09 Repl. Trigger Compl. kit replaces the trigger components (parts 26–28), restoring proper control response and more dependa..

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

Tork Craft Replacement Two Pin Flange Wrench (TCAG0115-SK17) At a Glance: Two pin flange wrench (pin spanner) for safe disc and flange nut changes on the Tork Craft TCAG0115 angle grinder Every grinder owner knows the ritual: new disc, tight flange nut, and the spanner has vanished into the same dimension as 10mm sockets. The Tork Craft TCAG0115-SK17 Replacement Two Pin Flange Wrench brings order back to your workshop. This pin spanner is designed to engage the two-hole flange nut used on ..

Tork Craft Repl. Two Pin Flange Wrench & Hex Wrench (62/63) (TCAG0230-SK17) At a Glance: Two pin flange wrench (pin spanner) and hex wrench set for disc changes and adjustments on the Tork Craft TCAG0230 – parts 62 & 63 Angle grinders are brilliant tools… right up until you need to change a disc and the spanner has disappeared into the same alternate dimension as 10mm sockets. The Tork Craft TCAG0230-SK17 Replacement Two Pin Flange Wrench & Hex Wrench set brings your grinder’s essential to..

REPLACEMENT TOOL BAG FOR TWIN PACK TC20002....

RESERVOIR SEAL VCP ET-BG....