Power Tools

Tork Craft Repl. Cord & Clamp Set (48/49/54/55) Service Kit (TCAG0115-SK16) At a Glance: Replacement power cord and clamp/strain relief set (parts 48, 49, 54 & 55) for the Tork Craft TCAG0115 angle grinder A hard-working grinder cord takes knocks: it gets tugged, twisted, dragged over edges, and sometimes “mysteriously” develops intermittent power at the worst moment. If your TCAG0115 cuts out when the cord moves, shows insulation damage, or has a loose strain relief, it’s time for a prope..

Tork Craft Repl. Cord & Clamp Set (57-60) Service Kit (TCAG0230-SK16) At a Glance: Replacement power cord and clamp/strain relief set (parts 57–60) for the Tork Craft TCAG0230 angle grinder A grinder cord lives a hard life: it gets tugged, twisted, dragged over sharp edges and sometimes “mysteriously” starts cutting out right when you need the tool most. If your TCAG0230 loses power when the cord moves, shows insulation damage, or the strain relief is loose or broken, it’s time for a prope..

Tork Craft Repl. Fuse (42) Stand Service Kit (TCMD0068HD-SK23) At a Glance: Replacement fuse for stand electrical reference part (42) on TCMD0068HD mag base drills. A fuse is the small hero that sacrifices itself to protect bigger, more expensive components. If your mag drill suddenly won’t power up after an overload, short, or electrical spike, a blown fuse is often the first thing to check. The Tork Craft TCMD0068HD-SK23 Replacement Fuse replaces the component referenced as part (42), he..

Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035-50HD-SK20) At a Glance: Genuine replacement fuse for the TCMD0035-50HD—diagram part (44) for circuit protection and power restoration. A fuse is the tool’s built-in “circuit breaker”: it sacrifices itself to protect wiring and electronics when an overload or fault occurs. If your Tork Craft TCMD0035-50HD suddenly won’t power up, cuts out unexpectedly, or shows no signs of life, a blown fuse is a common (and thankfull..

Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035HD-SK20) At a Glance: Genuine replacement fuse for the TCMD0035HD—diagram part (44) for circuit protection and power restoration. A fuse is a tiny component with one heroic job: sacrifice itself before something expensive does. If your Tork Craft TCMD0035HD mag base core drill has lost power or keeps cutting out, a blown fuse is a common culprit. The TCMD0035HD-SK20 Replacement Fuse Stand Service Kit replaces the..

Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035WO-SK22) At a Glance: Genuine replacement fuse for the TCMD0035WO—diagram part (44) for circuit protection and power restoration. A fuse is the tool’s built-in “circuit breaker”: when something goes wrong, it pops first to protect the electronics and wiring from more serious damage. If your Tork Craft TCMD0035WO mag base drill has suddenly lost power or won’t start, a blown fuse is a common (and thankfully simple) cul..

Tork Craft Replacement Fuse (62) Stand Service Kit At a Glance: Replacement fuse (part 62) for stand electrical protection and reliable operation A fuse is the tiny hero that sacrifices itself so the expensive electronics don’t have to. When the stand’s electrical system suddenly goes dead, won’t power up, or stops responding after a surge or overload, a blown fuse is often the first (and best) thing to check. The Tork Craft Replacement Fuse (62) Stand Service Kit is a direct spare part refere..

Tork Craft Replacement Fuse (62) Stand Service Kit (TCMD0035QE-SK024) At a Glance: Genuine replacement fuse for the TCMD0035QE—diagram part (62) for circuit protection and power restoration. A fuse is the tool’s “electrical bodyguard”: when something goes wrong, it takes the hit first to protect the rest of the system. If your Tork Craft TCMD0035QE mag base core drill has lost power or refuses to start, a blown fuse is a common (and thankfully simple) culprit. The TCMD003..

Tork Craft Repl. Fuse Only 250V For Magbase Drills (TCMD1000) At a Glance: Replacement fuse only, rated 250V, for Tork Craft mag base drills. A fuse is the drill’s built-in “safety sacrifice”—it blows to protect the more expensive components when something goes wrong. If your mag base drill suddenly won’t power up after an overload, a jam, or an electrical surge, the fuse is one of the first things to check. The Tork Craft TCMD1000 Replacement Fuse (250V) is a direct replacement fuse only,..

Tork Craft Repl. Handle (1-3) Stand Service Kit (TCMD0035-SK15) At a Glance: Replacement handle set for stand assembly reference parts (1–3) on TCMD0035 series mag base drills. The feed handle is where precision drilling becomes human-powered—every millimetre of control comes through that grip. If the handle is loose, bent, cracked, or the mounting parts have worn, you’ll feel it immediately as sloppy feeding, reduced accuracy, and unnecessary frustration. The Tork Craft TCMD0035-SK15 Repl..

Tork Craft Repl. Handle (15-17) Stand Service Kit At a Glance: Replacement handle components (parts 15–17) for the Tork Craft TCDM0035PM stand The handle on a drill stand does more than just “move the head up and down” — it’s your control lever for precision, pressure and safety. If the handle is bent, loose, cracked, or missing parts, you lose smooth feed control and accuracy suffers fast. The Tork Craft TCDM0035PM-SK23 Repl. Handle stand service kit replaces the handle components (parts ..

Tork Craft Replacement Handle (6-9) Stand Service Kit (TCMD0035QE-SK018) At a Glance: Replacement feed handle kit for the TCMD0035QE stand—diagram parts (6–9) for smooth, controlled drilling feed. The feed handle is the part you trust with your accuracy. If it’s bent, cracked, loose, or slipping, the whole drilling experience becomes a wrestle. The Tork Craft TCMD0035QE-SK018 Replacement Handle Stand Service Kit replaces the handle components referenced as parts (6–9), re..