Power Tools

Tork Craft Repl. Armature & Magnetic Ring (22/28/29/30) Service Kit (TCAG0115-SK08) At a Glance: Replacement armature and magnetic ring kit (parts 22, 28, 29 & 30) for the Tork Craft TCAG0115 115mm angle grinder When an angle grinder starts losing punch, running unevenly, sparking excessively, or sounding “angry” in all the wrong ways, the motor internals are often the culprit. The Tork Craft TCAG0115-SK08 Repl. Armature & Magnetic Ring Service Kit replaces the key motor drive components r..

Tork Craft Repl. Armature & Magnetic Ring (27/33/34) Service Kit (TCAG0230-SK08) At a Glance: Replacement armature (rotor) and magnetic ring kit (parts 27, 33 & 34) for the Tork Craft TCAG0230 angle grinder When an angle grinder starts losing punch, running unevenly, or throwing more sparks than a New Year’s braai, the motor internals are often the culprit. The Tork Craft TCAG0230-SK08 Repl. Armature & Magnetic Ring Service Kit replaces the key rotating motor components referenced as parts..

Tork Craft Replacement Auxiliary Handle (21) Service Kit (TCAG0115-SK06) At a Glance: Replacement side (auxiliary) handle for the Tork Craft TCAG0115 angle grinder – part 21 An angle grinder is all torque and attitude—so the auxiliary handle is not a “nice-to-have”, it’s your control lever. If your side handle is missing, cracked, or no longer tightens properly, you lose stability and increase fatigue (and the chance of kickback surprises). The Tork Craft TCAG0115-SK06 Replacement Auxiliar..

Tork Craft Replacement Auxiliary Handle (26) Service Kit (TCAG0230-SK06) At a Glance: Replacement side (auxiliary) handle for the Tork Craft TCAG0230 angle grinder – part 26 An angle grinder is all speed and torque — and that means your grip matters. The auxiliary (side) handle gives you the leverage and stability needed for controlled starts, cleaner lines, and safer handling when the disc bites or the load changes suddenly. If your side handle is missing, cracked, or won’t tighten proper..

Tork Craft Repl. Bearing & Bush (24/31/32) Service Kit (TCAG0115-SK07) At a Glance: Replacement bearing & bush kit (parts 24, 31 & 32) for the Tork Craft TCAG0115 115mm angle grinder Bearings and bushes are the unsung heroes inside an angle grinder—quietly keeping everything aligned while the tool does loud, messy work. When these support parts wear, you’ll often notice extra vibration, rough running, heat build-up, or a “wobble” feeling that makes the grinder harder to control. The Tork C..

Tork Craft Repl. Bearing & Bush (29/37/40) Service Kit (TCAG0230-SK07) At a Glance: Replacement bearing and bush kit (parts 29, 37 & 40) for the Tork Craft TCAG0230 angle grinder Bearings and bushes are the quiet precision parts that keep your grinder’s rotating components aligned while the tool does loud, dusty work. When these support parts wear, you’ll often feel extra vibration, hear roughness from the gear head, or notice unwanted play that makes the grinder harder to control. The Tor..

Tork Craft Repl. Cable & Sheath (29/30) Service Kit For TCID0850 At a Glance: Replacement cable and protective sheath components (parts 29 and 30) for the Tork Craft TCID0850 impact driver Cables live a hard life in the workshop—flexed, pulled, snagged, and sometimes “repaired” with tape and hope. If your impact driver’s cable is damaged or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID0850-SK10 Repl. Cable & Sheath service ..

Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100 At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100 Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry point, or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ..

Tork Craft Replacement Carbon Brush (36) Motor Service Kit (TCMD0035-50HD-SK11) At a Glance: Replacement carbon brush for the TCMD0035-50HD motor—diagram part (36) to restore stable electrical contact and smooth running. Carbon brushes are the motor’s “power hand-off”: they transfer electricity to the spinning commutator so the armature can do its job. As brushes wear down, you may notice loss of power, erratic running, increased sparking, or a motor that cuts out under load. ..

Tork Craft Replacement Carbon Brush (41) Motor Service Kit (TCMD0035-SK11) At a Glance: Replacement carbon brush for motor assembly reference part (41) on TCMD0035 series mag base drills. Carbon brushes are the motor’s contact point—quietly transferring power to the spinning armature while you drill through steel like it owes you money. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craf..

Tork Craft Repl. Carbon Brush (42) Motor Service Kit (TCMD0068HD-SK13) At a Glance: Replacement carbon brush for motor assembly reference part (42) on TCMD0068HD mag base drills. Carbon brushes are the motor’s contact point—transferring power to the spinning armature while your mag drill does the heavy work. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craft TCMD0068HD-SK13 Replacement..

Tork Craft Repl. Carbon Brush (61) Motor Service Kit (TCMD0055QE-SK15) At a Glance: Replacement carbon brush for motor assembly reference part (61) on TCMD0055QE mag base drills. Carbon brushes are the motor’s contact point—quietly transferring power to the spinning armature while you push the drill through steel. Over time they wear down, lose spring pressure, and can start causing heavy sparking, erratic speed, or that “weak motor” feeling under load. The Tork Craft TCMD0055QE-SK15 Repla..