DECKING TOOL 10G STD HEAD PRE-DRILL & COUNTERSINK
Click Image for Gallery
TorkCraft - Decking Tool Kit
Diameter: 3.6 mm
CSK Diameter: 9.2 mm
CSK Angle: 45 Degrees
Hole Depth: 30 mm
Application:
The Tork Craft Decking Tool, the ultimate all-in-one pre-drilling countersink tool! Purpose built of decking and woodworking applications, especially where stainless steel screws are used. The single drilling countersinking action of the tool allows for an easier, quicker and more professional looking finish.
- HSS Parabolic Bits for faster drilling
- Decking & woodworking applications
- Easy, quick & professional looking finish
Installation
- Always drill in a straight and controlled manner.
- The collar will stop spinning when the hole depth is reached.
Replacing Bit
- Make sure power drill is safely in OFF mode and remove the decking tool from the drill.
- The flat side of the drill bit must face the set screw then tighten.
- Buy Replacement Drill Bits
Included
- 1 x 10G Decking Tool
- 2 x Replacement Bits
- 1 x Hex Wrench
NOTE:
For use with standard 10G head screws
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
