Countersinks / Screw Pilots
Brand: TORK CRAFT
MPN: TZ AC26-02
Tork Craft Allen Key For AC26 Screw Pilot
At a Glance; Replacement hex key for TZ-AC26 screw pilot/countersink set
The Tork Craft Allen Key For AC26 Screw Pilot is the small but essential accessory that keeps your TZ-AC26
screw pilot/countersink set working properly. This hex key is used to loosen and tighten the grub screws that
hold the pilot drills and countersink bodies in place, allowing you to adjust drill length or replace worn bits
quickly. Keep a spare in your..
N$ 6.10
Ex VAT:N$ 5.30
Brand: FESTOOL
MPN: FES492525
Festool Centering bit ZB HS D 5 EURO CE
Order number: FES492525
Model: ZB HS D 5 EURO CE ....
N$ 2,678.35
Ex VAT:N$ 2,329.00
Brand: ALPEN
MPN: ALP2290020501
20,5 mm Ø Cobalt 90° counter sink
1 countersink bit in
easy retail merchandising for display.
Range
of application:
Universally usable deburring and countersink tool for drill holes of all kinds.
Very good cutting properties without 'judder marks', thanks to radial relief grinding
can easily be sharpened on the shaving side.
For counter sinking:
Stainless steel
up to 600°C cutter temperature
Suitable for CNC machines....
N$ 932.65
Ex VAT:N$ 811.00
Brand: ALPEN
MPN: ALP64050165
16,5 mm Ø Solid Carbide 90° countersink
1 countersink bit in
easy retail merchandising for display.
Range
of application:
For countersinking and deburring of steels with
medium/high tensile strength, cast iron, stainless
steels as well as silicium containing aluminium-
alloys.
For countersinking:
Stainless steel
Medium/high tensile strength
Cast iron
Silicium containg aluminium-alloys
Suitable for CNC machines....
N$ 1,897.50
Ex VAT:N$ 1,650.00
Brand: TORK CRAFT
MPN: T CS203
Carbon Steel Countersink - 1/2” (12.7mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 60.03
Ex VAT:N$ 52.20
Brand: TORK CRAFT
MPN: T CS201
Carbon Steel Countersink - 1/4” (6.35mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 54.05
Ex VAT:N$ 47.00
Brand: TORK CRAFT
MPN: T CS205
Carbon Steel Countersink - 3/4" (19mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving the..
N$ 71.99
Ex VAT:N$ 62.60
Brand: TORK CRAFT
MPN: T CS202
Carbon Steel Countersink - 3/8” (9.5mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving th..
N$ 57.73
Ex VAT:N$ 50.20