DIAMOND CORE BIT 117X150MM CONCRETE M22
For plumbers, electricians or general contractors needing to drill a hole quickly and cleanly in concrete for an installation.
Core diameter: Ø117mm
Depth: 170mm
Adaptor thread: M22
Main use: Concrete
Application:
The dry cut diamond core drill is designed to be used without water to drill into:
- Concrete
- Concrete pipes
- Brickwork
- Roof tiles
- Slate
- Stone
- Paving
- Tarmac
It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.
INFORMATION:
Have a look at the different adaptors under the EXTRA INFO tab and the complete
range under the ACCESSORIES tab.
IMPORTANT:
Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
pipes or electrical conduit.
Hex shank adaptors for the Dry Cut Diamond Core Drill range:
- Hex shank 70mm, M16 thread - TC18HEX1
- Hex shank 200mm, M16 thread - TC18HEX2
- Hex shank 300mm, M16 thread - TC18HEX3
- Drift key for removing the pilot drill - TC18KEY
- Pilot drill bit (not included with adaptors)- TC18PILOT
SDS Plus adaptors for the Dry Cut Diamond Core Drill range:
- SDS Plus 70mm, M16 thread - TC18SDS1
- SDS Plus 200mm, M16 thread - TC18SDS2
- SDS Plus 300mm, M16 thread - TC18SDS3
- SDS Plus 70mm, M22 thread - TC18SDS4
- SDS Plus 200mm, M22 thread - TC18SDS5
- SDS Plus 300mm, M22 thread - TC18SDS6
- Drift key for removing the pilot drill - TC18KEY
- Pilot drill bit (not included with adaptors)- TC18PILOT
NOTE:
The pilot drill bit is not included with the adaptors and it is available
separately -
TC18PILOT
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|