SCREW EXTRACTOR NO.6 CARDED
Size: M18 - M24
Diameter: 10 0mm
Recommended Drill Size: 12.0 mm
Shank: 12.0mm Square Shank
Application:
The Tork Craft Screw Extractor is for the removal of broken bolts and studs, made of carbon steel. Determine the size of the bolt and the desired extractor size, use a file and flatten the broken bolt surface, usually bolts that broke are left with an uneven surface.
Locate the center on the flattened surface and mark with a center punch. Drill a pilot hole, start off with a small diameter and increase to the recommended drill size depending on the extractor size in use.
Insert the extractor into the pilot hole and using a tap wrench the bolt can now be extracted carefully, by turning the screw extractor anti-clockwise.
- Carbon Steel
- Quick & Easy removal of broken bolts and studs
Recommended tap wrench:
- NR9005C
- NR9007C
Specifications
| Description | Specifications |
| Size | 10 mm |
| Cutting Length | 28 mm |
| Length | 90 mm |
| Shank | 12 mm Square |