Lock Mortising

Tork Craft Shaft Lock (30-31) Service Kit (TCCS0185-SK05) At a Glance: Shaft lock component kit (parts 30 & 31) for secure disc changes on the Tork Craft TCCS0185 cut-off saw The shaft lock is your disc-change sidekick: lock the spindle, loosen the retaining nut, swap the disc, tighten, and carry on. When the lock won’t engage properly, feels weak, or slips under torque, disc changes become frustrating and unsafe. The Tork Craft TCCS0185-SK05 Shaft Lock Service Kit replaces the components ..

Tork Craft Fan Shroud & Screws (37-38) Service Kit (TCCS0185-SK08) At a Glance: Replacement fan shroud and mounting screws (parts 37 & 38) for the Tork Craft TCCS0185 cut-off saw Motor cooling on a cut-off saw is not optional — it’s what keeps the tool alive when you’re making repeated cuts and the dust is flying. The fan shroud directs airflow where it’s needed and helps keep debris out of sensitive areas. If the shroud is cracked, loose, missing, or the screws are stripped, airflow becom..

Tork Craft Tool Housing Kit (40-41/55-56/58-61) Service Kit (TCCS0185-SK10) At a Glance: Replacement tool housing component kit (parts 40–41, 55–56 and 58–61) for the Tork Craft TCCS0185 cut-off saw The housing on a cut-off saw does more than make it look like a tool — it keeps the motor aligned, protects wiring from dust and strain, supports the switch area, and gives you a solid grip while the disc is doing violent physics. If the casing is cracked from impact, screw posts are broken, th..

CUTTER 22MM /LOCK MORTICER FOR ALUMINIUM NEW SCREW TYPE....

Lock mortising attachment Jig to be used with an electric drill to bore out a mortise to fit a door lock. Application: The jig is clamped onto a door to cut a mortise for the fitment of a door lock. A drill is attached to the jig with the following requirements: The chuck needs to be removed to expose the 20UNF thread. The drill will be clamped on the collar (ø46mm). The drill will be part of the jig and will thus be a semi-permanent addition. The cutting length and de..

TCT CUTTER 25MM FOR EG1....

Cutter for EG1 This is a cutter for the EG1 lock mortising attachment PART NUMBER: EG4 DESCRIPTION: Cutter tip for EG1 SIZE: Ø22mm....

Cutter for EG1 This is a cutter for the EG1 lock mortising attachment PART NUMBER: EG9 DESCRIPTION: Cutter tip for EG1 SIZE: Ø25mm....

2 1/2-Inch Light Duty Clamp On Vise (63.5 mm) Pony 13025 2.5-Inch (63.5mm) Light Duty Clamp On Vise is designed for light duty home, shop and professional use. It is fully portable yet mounts easily and securely on edges up to 2-inches (50mm) thick. Features: 3-inch jaw width, 2-1/2 inch (63,5mm) opening capacity, plated steel screw and handle, steel double guide bars allow smooth operation, orange baked enamel finish prevents rusting, cast pipe jaws ho..