Router Bits
Brand: PRO-TECH
MPN: KP1210
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoothe..
N$ 602.60
Ex VAT:N$ 524.00
Brand: PRO-TECH
MPN: KP1211
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoothe..
N$ 766.48
Ex VAT:N$ 666.50
Brand: PRO-TECH
MPN: KP1212
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoothe..
N$ 1,181.05
Ex VAT:N$ 1,027.00
Brand: PRO-TECH
MPN: KP1213
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoother lo..
N$ 1,395.53
Ex VAT:N$ 1,213.50
Brand: PRO-TECH
MPN: KP1214
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoother lo..
N$ 1,457.63
Ex VAT:N$ 1,267.50
Brand: PRO-TECH
MPN: KP1215
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, rounding
over and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.
Rounded edges give a project a softer, smoother lo..
N$ 1,593.90
Ex VAT:N$ 1,386.00
Brand: PRO-TECH
MPN: KP122009
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 316.25
Ex VAT:N$ 275.00
Brand: PRO-TECH
MPN: KP122421
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 672.18
Ex VAT:N$ 584.50
Brand: PRO-TECH
MPN: KP122441
Pattern
Flush Trim bit
Carbide
Tipped
These pattern flush trim plunge router bits are versatile, useful for template/pattern
routing of parts, joints, and internal cuts and can be used in hand-held and table-mounted
routers. They are essentially plunge-cutting straight with shank-mounted pilot ball-bearings.
Excellent for template work!
The
template is attached to the work piece, and the pilot bearing rides along its edge
as the cutting edges rout the work piece, forming a..
N$ 757.28
Ex VAT:N$ 658.50
Brand: PRO-TECH
MPN: KP12MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolut..
N$ 213.33
Ex VAT:N$ 185.50
Brand: PRO-TECH
MPN: KP12MM L
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolut..
N$ 207.00
Ex VAT:N$ 180.00
Brand: PRO-TECH
MPN: KP13
Spindle
cutter - Wedge Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP12
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spindle shaft.....
N$ 1,325.95
Ex VAT:N$ 1,153.00