Hose Adaptors / Tails

AirCraft Hose Tail Connector Brass 1/4" F x 6mm (SBF1257) At a Glance: Brass hose tail adaptor: 1/4" female thread to 6mm hose tail (barb) Need to connect a 6mm hose onto a 1/4" threaded port without drama? The AirCraft SBF1257 brass hose tail connector is your clean, workshop-ready adaptor. It combines a 1/4" female thread on one side with a 6mm hose tail (barb) on the other, making it ideal for compressed-air hoses, pneumatic lines, air tools, regulators and general works..

AirCraft Hose Tail Connector Brass – 1/4" Female x 8mm (SBF1258) At a Glance: 1/4" Female Thread to 8mm Hose Tail in Solid Brass When you need a clean, dependable join between a threaded port and an 8mm hose, this AirCraft brass hose tail connector is the simple, reliable solution. The hose tail (barb) is designed to grip the inside of the hose for a snug fit, while the 1/4" female thread makes it easy to integrate into common pneumatic and compressed air setups. Ideal for quick li..

AirCraft Hose Tail Connector Brass – 1/4" Female x 10mm (SBF1259) At a Glance: 1/4" Female Thread to 10mm Hose Tail in Solid Brass When your air line setup calls for a slightly larger hose, the AirCraft SBF1259 gives you a clean, dependable connection between a 1/4" female threaded port and a 10mm hose. The hose tail (barb) design helps the hose grip firmly from the inside, while the threaded end makes it easy to integrate into common pneumatic and compressed air systems. Ideal for..

AirCraft Hose Tail Connector Brass – 1/4" Female x 12mm (SBF1260) At a Glance: 1/4" Female Thread to 12mm Hose Tail in Solid Brass When your setup needs a larger hose for better flow and a tougher feel, the AirCraft SBF1260 is a dependable way to join a 1/4" female threaded port to a 12mm hose. The hose tail (barb) is designed to grip the inside of the hose for a snug mechanical hold, while the threaded end integrates neatly into common pneumatic and compressed air systems. Ideal f..

AirCraft Hose Tail Connector Brass – 1/4" Male x 6mm (SBM1257) At a Glance: 1/4" Male Thread to 6mm Hose Tail in Solid Brass Small hose, big job—this AirCraft brass hose tail connector is a neat way to join a 6mm hose to a 1/4" threaded port. The hose tail (barb) end grips the inside of the hose for a firm fit when clamped correctly, while the 1/4" male thread makes it quick to screw into compatible couplers, adaptors, regulators or manifolds. Ideal for compressed air lines, pneuma..

AirCraft Hose Tail Connector Brass – 1/4" Male x 8mm (SBM1258) At a Glance: 1/4" Male Thread to 8mm Hose Tail in Solid Brass When you need a clean, dependable way to connect an 8mm hose to a threaded air fitting, the AirCraft SBM1258 is the go-to connector. The hose tail (barb) end grips the inside of the hose for a firm hold when clamped correctly, while the 1/4" male thread makes it easy to screw into compatible pneumatic and compressed air components. Ideal for workshop air line..

AirCraft Hose Tail Connector Brass – 1/4" Male x 10mm (SBM1259) At a Glance: 1/4" Male Thread to 10mm Hose Tail in Solid Brass When you’re running a larger hose and want a dependable threaded connection, the AirCraft SBM1259 is a workshop-ready solution. This solid brass hose tail connector joins a 10mm hose to a 1/4" male threaded port, making it ideal for compressor lines, pneumatic tools, and clean air line routing. Push the hose fully onto the tail, clamp it correctly, and thre..

AirCraft Hose Connector Brass – 1/4" Male x 12mm (SBM1260) At a Glance: 1/4" Male Thread to 12mm Hose Connection in Solid Brass When you’re running a larger hose and want a dependable threaded join, the AirCraft SBM1260 is a tough, no-nonsense brass hose connector. It connects a 12mm hose to a 1/4" male threaded port—perfect for compressor lines, workshop air systems and pneumatic routing where a secure fit matters. Push the hose fully onto the hose tail (barb), clamp it correctly,..

AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (SBM1261) At a Glance: 1/4" Male Thread to 13mm Hose Tail in Solid Brass When your air line setup runs a larger hose and you want a dependable threaded connection, the AirCraft SBM1261 is a simple, tough solution. This solid brass hose tail connector joins a 13mm hose to a 1/4" male threaded port—ideal for workshop compressed air lines, compressor plumbing and pneumatic systems where a secure hose grip and easy servicing matter...

Machined Fitting - Hose Adaptor 1/8' M x 6 mm GAV1233-1 Hose Adaptor Thread: 1/8' BSP Male x 6 mm Fits a hose with 6 mm inside diameter Made in Italy    1/8' Male BSP Screw Thread....

Machined - Hose Adaptor 1/2' M x 20 mm GAV1233-10 Hose Adaptor Thread: 1/2' BSP Male x 20 mm Fits a hose with 20 mm inside diameter Made in Italy    1/2' Male BSP Screw Thread....

Machined - Hose Adaptor 1/2' M x 20 mm GAV1233-10P [Packaged for display] Hose Adaptor Thread: 1/2' BSP Male x 20 mm Fits a hose with 20 mm inside diameter Made in Italy    1/2' Male BSP Screw Thread....