10L PAINT POT WITH 2M HOSE AND GUN 1.8MM NO CUP
The spray gun is excellent for commercial painting where a large amount of spraying is required.
The paint pot allows for a higher volume of paint to be sprayed using the pressure feed spray gun.
The paint pot doesn't include an agitator.
Length of hoses: 2m
Tips and techniques
When sprayfinishing, it's always advised to keep the spray gun parallel to the workpiece surface. The distance from the surface of the workpiece should be the width of the spray pattern.
The lower the pressure of the air, the lower the chance to have bounce-back (overspray). The pressure should only be increased when the spray pattern is uneven - paint focused in the middle when the fan setting is wide.
consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|