AIR DIE GRINDER 6MM 14 PIECE KIT BLOW MOULD CASE
Click Image for Gallery
Die grinder kit
Professional grinder kit giving complete flexibility for most grinding and polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at 6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Included in the kit:
- 10 grinding points
- Ø 3.2mm collet
- Ø 6mm collet
- Spanner/wrench
- ¼' connector
Features:
- Lightweight
- Small size
- Includes 3.2mm reducing collet
- Low air consumption
- In carry casse
Application:
- Polish rough edges
- Remove rust on steel
| Description | Specification |
| Working pressure | 6.3 Bar |
| Free speed | 25 000 rpm |
| Average air consumption | 115 l/min |
| Suggested minimum compressor HP | 2 HP |
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|