Staple Guns

21-Gauge Staples — 4 mm (Box of 10 000) These 21-gauge staples, with 4 mm leg length and supplied in a box of 10 000, are perfect for light-duty upholstery, fabric work, thin panel backing and delicate wood trim tasks. Designed to provide secure grip without over-penetration into soft materials.....

21-Gauge Staples — 6 mm (Box of 5 000) These 21-gauge staples with a 6 mm leg length are perfect for interior lightweight applications such as upholstery, fabric and thin panel fixing. The 5 000-piece bulk box gives you extended usage before reloading, with controlled penetration to minimize damage beyond the material.....

21-Gauge Staples — 8 mm (Box of 5 000) These 21-gauge staples, with 8 mm legs and supplied in a box of 5 000, are ideal for sewing light fabrics, securing thin panels, attaching linings and trim where deeper penetration is undesirable. Their fine gauge and moderate leg length make them a good fit for delicate materials.....

AirCraft Staples – 12mm, 21 Gauge (5000 per Box) (STAP005) At a Glance: 12mm long, 21-gauge staples supplied in a 5000-piece box for high-volume stapling. When you need clean, consistent fastening without constantly running out, the AirCraft STAP005 staple box keeps your stapler fed and your workflow moving. These 12mm staples in 21 gauge are a practical choice for everyday workshop and trade use—great for upholstery, fabric and leather work, trims, light timber projects, packaging, and genera..

21-Gauge Staples — 12 mm (Box of 5 000) These 21-gauge staples with 12 mm leg length (supplied in a 5 000 count pack) are ideal for light interior applications such as panel backing, trim, upholstery and soft wood fixings. They provide sufficient bite into substrates while keeping a low profile for clean finishing. The product code is STAP005.....

21-Gauge Staples — 14 mm (Box of 5 000) These 21-gauge staples, with 14 mm leg length and supplied in a box of 5 000, are perfect for moderate penetration tasks in wood, panel backing, trim, upholstery and light interior applications. The fine wire gauge and sufficient leg length make them useful when you want secure fastening without heavy intrusion.....

Pneumatic staple gun 21 Gauge The staple gun makes use of 21 Gauge staples with a crown width of 12.7mm. It is light in weight, and compact, with an ergonomically shaped handle that is easy to grip. Max length of staples: 16mm Magazine capacity: 125 staples Great for construction and home repair projects: fabric, upholstery, vinyl and light duty wood assembly. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL). Only use 21 Gauge staples.....

AirCraft Cyl. Cap & Exhaust Cover Kit (1-5) For AT0019 (AT0019-SK01) At a Glance: Top-end seal and cover service kit (Parts 1–5) to restore compression and reduce air leaks on the AirCraft AT0019 Air Stapler. Pneumatic tools are basically tiny air-powered engines—when the seals get tired, performance drops fast. The AirCraft AT0019-SK01 Cyl. Cap & Exhaust Cover Kit is the essential “top-end refresh” for the AirCraft AT0019 Air Stapler, covering components 1–5 from the spares diagram. It’..

AirCraft Gasket, Piston & O-ring Kit (6-12) For AT0019 (AT0019-SK02) At a Glance: Seal-and-piston service kit (Parts 6–12) for the AirCraft AT0019—designed to restore compression, reduce air leaks and bring back crisp cycling. Inside every pneumatic stapler is a fast-moving piston that relies on tight seals to build pressure and deliver a clean, confident drive. When gaskets and O-rings wear, you’ll usually notice air leaks, weak power, inconsistent firing, or a tool that feels “lazy” betw..

AirCraft Main Body (20) For AT0019 (AT0019-SK03) At a Glance: Replacement main body housing (Part 20) for the AirCraft AT0019—restores structural alignment, safe grip, and dependable operation. The main body of a pneumatic stapler isn’t just “the shell”—it’s the backbone that keeps internal components aligned, sealed, and working together under pressure. If the housing is cracked, worn, cross-threaded, or damaged from hard use, you can end up with poor alignment, leaking air paths, loose f..

AirCraft Cylinder (3 & 17) For AT0019 (AT0019-SK04) At a Glance: Replacement cylinder components (Parts 3 & 17) for the AirCraft AT0019—helps restore compression, smooth piston travel and reliable firing. The cylinder is where the real action happens: it’s the precision bore that guides the piston and holds the pressure that drives staples with authority. If the cylinder is worn, scored, damaged, or no longer sealing correctly, the stapler can lose power, cycle inconsistently, leak air, or..

AirCraft Compl. Trigger Kit (22,23,25-31,48) For AT0019 (AT0019-SK05) At a Glance: Complete trigger/valve service kit (Parts 22, 23, 25–31 & 48) that restores smooth trigger action, proper air control and reliable firing on the AirCraft AT0019. The trigger assembly is the “brain switch” of your pneumatic stapler—when it’s crisp, the tool feels responsive and safe. When it’s worn, dirty, or leaking, you’ll notice problems fast: a sticky trigger, delayed firing, inconsistent cycling, or air ..