Spare Parts

AirCraft Internal Sleeve For AT0012 Reversible Air Drill (AT0012-31) At a Glance: Replacement internal splined sleeve that supports drive alignment and stable engagement within the AT0012 drill assembly. When an air drill starts feeling loose, “notchy”, or inconsistent under load, it’s often a sign that an internal drive component is wearing out. The AirCraft AT0012-31 Internal Sleeve is a replacement sleeve/bushing used inside the AirCraft AT0012 reversible air drill. With its internal spline..

AirCraft Air Drill Service Kit Bearings (17,29) for AT0005 (AT0005-SK02) At a Glance: Bearing replacement kit for the AirCraft AT0005 air drill—helps eliminate rough running, excessive noise and vibration caused by worn bearings. Bearings are the quiet workhorses inside your air drill—until they wear, then everything gets louder, rougher and less precise. The AirCraft AT0005-SK02 service kit supplies the replacement bearings referenced as parts (17,29) for the AirCraft AT0005 air drill. Idea..

AirCraft Air Drill Service Kit – Chuck & Key (32-34) For AT0005 (AT0005-SK08) At a Glance: Chuck and key service kit for AirCraft AT0005 – replaces parts 32-34 to restore strong bit grip and smooth tightening. A worn chuck turns drilling into a constant fight—bits slip, run off-centre, and tightening never feels quite “right”. The AirCraft AT0005-SK08 service kit replaces the chuck and key components for the AirCraft AT0005, covering reference positions 32-34. It’s the go-to refresh when your ..

AirCraft Air Drill Service Kit – Gear & Rot. Axle (25-27) For AT0005 (AT0005-SK06) At a Glance: Gear and rotational axle service kit for AirCraft AT0005 – replaces drive components referenced as 25-27 for smooth, efficient power transfer. When an air drill starts sounding “gritty”, slipping under load, or losing that crisp torque delivery, the drivetrain is usually crying for attention. The AirCraft AT0005-SK06 service kit is built to refresh the gear and rotational axle components for the Air..

AirCraft Air Drill Service Kit – Gear Ring & Fixing Ring (28/30) For AT0005 (AT0005-SK07) At a Glance: Gear ring and fixing ring service kit for AirCraft AT0005 – replaces parts 28 and 30 to keep the drivetrain tight, aligned, and smooth. A ring gear that’s worn, chipped, or no longer sitting perfectly can turn a good air drill into a noisy, uneven, power-wasting machine. The AirCraft AT0005-SK07 service kit is designed to refresh the gear ring and fixing ring on the AirCraft AT0005, covering ..

AirCraft Air Drill Service Kit – Main Body Comp. (1/13-15/35) For AT0005 (AT0005-SK04) At a Glance: Main body component service kit for AirCraft AT0005 – refreshes housing/control-related parts referenced as 1/13-15/35. If your AirCraft AT0005 air drill has taken a few knocks, feels loose in the hand, or the controls and body parts are starting to look (and feel) tired, the AT0005-SK04 service kit is the smart fix. This Main Body Components kit targets the external and control-side parts of th..

AirCraft Air Drill Service Kit O-rings and Seals (2,3,5,7,16,24) for AT0005 (AT0005-SK01) At a Glance: Complete O-ring and seal refresh kit for the AirCraft AT0005 air drill—targets common leak points and worn seals. When an air drill starts losing power, free-spinning, or hissing like a kettle, the culprit is often tired seals. The AirCraft AT0005-SK01 service kit supplies the O-rings and seals referenced as parts (2,3,5,7,16,24) for the AT0005 air drill, helping you restore proper sealing,..

AirCraft Air Drill Service Kit – Rotor & Cyl. (18/19/21-23) For AT0005 (AT0005-SK05) At a Glance: Rotor and cylinder service kit for AirCraft AT0005 – replaces parts 18/19/21-23 to restore smooth, consistent drill performance. When a pneumatic drill starts losing punch, running rough, or struggling to maintain speed, the usual suspects live in the motor group. The AirCraft AT0005-SK05 service kit is a targeted rotor & cylinder refresh designed for the AirCraft AT0005 air drill, covering compon..

AirCraft Air Drill Service Kit – Rotor Blade 5pc Set (20) For AT0005 (AT0005-SK09) At a Glance: 5-piece rotor blade (vane) set for AirCraft AT0005 – replaces part 20 to bring back crisp power and smooth air-motor operation. Rotor blades (also called vanes) are the hardworking “muscles” inside the air motor—constantly sliding, sealing, and converting compressed air into rotation. Over time they wear down, lose sealing efficiency, and your drill starts feeling weak, sluggish, or inconsistent. Th..

AirCraft Air Drill Service Kit Trigger Comp. (4,6,8,9,10-12) for AT0005 (AT0005-SK03) At a Glance: Trigger component service kit for the AirCraft AT0005 air drill—ideal for fixing sticky triggers, inconsistent throttle response or air leakage around the trigger/valve area. When an air drill starts acting moody—sticky trigger, uneven speed control, or a little hiss where it shouldn’t—there’s a good chance the trigger/valve parts are worn, dirty or damaged. The AirCraft AT0005-SK03 service kit..

AirCraft Air Inlet Plug For AT0012 Reversible Air Drill (AT0012-01) At a Glance: Replacement air inlet plug that restores a tight, dependable air supply connection on the AirCraft AT0012 reversible air drill. A solid air connection is the difference between “nice tool” and “why is this thing struggling?”. The AirCraft AT0012-01 Air Inlet Plug is a replacement inlet fitting for the AirCraft AT0012 reversible air drill. It threads into the drill’s air inlet and provides the connection point for ..

AirCraft Bushing For AT0012 Reversible Air Drill (AT0012-26) At a Glance: Replacement bushing that supports internal shafts and helps keep the AT0012 running smoother, quieter and more accurately. Bushings don’t get the glory, but they absolutely control the feel of a tool. The AirCraft AT0012-26 Bushing is a replacement internal bushing for the AirCraft AT0012 reversible air drill. Its job is to support and guide rotating components, keeping shafts properly aligned while reducing metal-on-met..