Power Tools
Brand: AIRCRAFT
MPN: AT0015-08
AirCraft Trigger for Air Ratchet Wrench 3/8" (AT0015-08) for Model AT0015
At a Glance: Genuine replacement trigger/lever for the AirCraft AT0015 3/8" air ratchet wrench—restores smooth actuation and dependable control.
The AirCraft AT0015-08 trigger is the control lever that makes your AT0015 3/8" air ratchet feel sharp and predictable. If the trigger has become bent, loose, uncomfortable to use, or doesn’t move smoothly, your tool becomes harder to control—especially in tight spaces where an ..
N$ 29.21
Ex VAT:N$ 25.40
Brand: AIRCRAFT
MPN: AT0015-03
AirCraft Valve Bushing for Air Ratchet Wrench 3/8" (AT0015-03) for Model AT0015
At a Glance: Genuine valve bushing spare part for the AirCraft AT0015 3/8" air ratchet wrench—supports smooth valve movement and consistent air control.
The AirCraft AT0015-03 valve bushing is a small but critical internal part that helps keep the AT0015 air ratchet’s valve components aligned and moving smoothly. When a valve bushing wears, the tool can become inconsistent—trigger response may feel rough, air contr..
N$ 8.05
Ex VAT:N$ 7.00
Brand: AIRCRAFT
MPN: AT0015-06
AirCraft Valve Plug for Air Ratchet Wrench 3/8" (AT0015-06) for Model AT0015
At a Glance: Genuine valve plug spare part for the AirCraft AT0015 3/8" air ratchet wrench—designed to close and seal the valve access point securely.
The AirCraft AT0015-06 valve plug is a simple but essential sealing component used in the valve area of the AT0015 3/8" air ratchet wrench. It closes off the valve access point and helps maintain proper internal sealing, which is critical for consistent airflow control ..
N$ 28.29
Ex VAT:N$ 24.60
Brand: AIRCRAFT
MPN: AT0017-10
AirCraft Valve Stem for Air Die Grinder 6mm Mini (AT0017-10)
At a Glance: Replacement valve stem for the AirCraft AT0017 6mm Mini Air Die Grinder—key component for throttle/air flow control.
The AirCraft AT0017-10 Valve Stem is a core internal control part that helps regulate airflow through your 6mm Mini Air Die Grinder. In simple terms: it plays a big role in how your tool “responds” when you operate the throttle—smooth start-up, predictable speed changes, and reliable shut-off.
..
N$ 22.20
Ex VAT:N$ 19.30
Brand: AIRCRAFT
MPN: AT0025-24
AirCraft Vanes For 7" Heavy Duty Air Angle Grinder (6 Per Set) (AT0025-24)
At a Glance: 6-piece replacement vane set for the AirCraft AT0025 7" Heavy Duty Air Angle Grinder—restores efficient airflow drive for stronger, smoother grinding.
Inside a pneumatic grinder, vanes are the “muscle fibres” of the air motor. They slide in and out of the rotor, using compressed air to generate torque and speed. Over time, vanes wear down, chip, or lose their crisp edges—leading to sluggish start-up, lo..
N$ 977.50
Ex VAT:N$ 850.00
Brand: AIRCRAFT
MPN: AT0015-18
AirCraft Washer for Air Ratchet Wrench 3/8" (AT0015-18) for Model AT0015
At a Glance: Genuine washer/spacer for the AirCraft AT0015 3/8" air ratchet wrench—helps maintain correct spacing and secure seating of internal components.
The AirCraft AT0015-18 washer is a small but important part that helps the AT0015 3/8" air ratchet wrench assemble correctly and run smoothly. In air tools, washers often act as spacers or seating surfaces—controlling end-play, helping components sit square, and preve..
N$ 13.57
Ex VAT:N$ 11.80
Brand: AIRCRAFT
MPN: AT0015-33
AirCraft Washer for Air Ratchet Wrench 3/8" (AT0015-33) for Model AT0015
At a Glance: OEM-fit spacing washer for the AirCraft AT0015 3/8" air ratchet wrench, helping maintain correct alignment and smooth operation.
The AirCraft AT0015-33 washer is a replacement washer used in the AT0015 3/8" air ratchet wrench assembly. Washers are critical for maintaining correct spacing, reducing play, and keeping components aligned under load. If your ratchet develops excessive movement, inconsistent engage..
N$ 10.70
Ex VAT:N$ 9.30
Brand: AIRCRAFT
MPN: AT0018-C02
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C02)
At a Glance: Service wrench for AirCraft air hydraulic riveters—designed to fit riveter fittings and nose components for quick, secure maintenance.
The AirCraft AT0018-C02 Wrench is the correct tool to keep your Air Hydraulic Riveter properly serviced and ready for work. It’s designed to suit key fittings and nose/front-end components, making it easier to tighten, loosen, and maintain parts without slipping, rounding, or damaging..
N$ 35.65
Ex VAT:N$ 31.00
Brand: AIRCRAFT
MPN: AT0018-C03
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C03)
At a Glance: Service wrench/spanner for AirCraft air hydraulic riveters—made for loosening and tightening riveter front-end and fitting components with a proper fit.
The AirCraft AT0018-C03 Wrench is a dedicated service spanner for maintaining an AirCraft Air Hydraulic Riveter. It’s designed to fit specific riveter fittings and front-end parts so you can tighten and loosen components cleanly—without slipping, rounding edges, or i..
N$ 35.65
Ex VAT:N$ 31.00