Power Tools
Brand: AIRCRAFT
MPN: AT0021-SK08
AirCraft Air Body Saw Service Kit Blade Chuck Comp. (29,31,32,43,47) For AT0021 (AT0021-SK08)
At a Glance: Blade chuck/clamp component kit (Parts 29, 31, 32, 43 & 47) that restores strong blade clamping and steadier cutting on the AirCraft AT0021.
If your body saw blade starts slipping, twisting, or refusing to stay square, the problem usually lives in the chuck. The blade chuck/clamp components take constant vibration and repeated blade changes, and once they wear, you’ll lose grip and ac..
N$ 326.08
Ex VAT:N$ 283.55
Brand: AIRCRAFT
MPN: AT0022
AirCraft Air Tire Buffer For Roughing Low Areas, Recapping And Tire Scuffing (AT0022)
At a Glance: Pneumatic tyre buffer designed for controlled roughing, scuffing and surface preparation—ideal for recapping, patch work and adhesion prep.
Tyre repair and recapping work lives or dies on surface preparation. If the rubber isn’t keyed properly, bonding suffers—and the job won’t last. The AirCraft AT0022 Air Tire Buffer is built for the real-world grind: roughing low areas, scuffing tyre surfa..
N$ 1,352.69
Ex VAT:N$ 1,176.25
Brand: AIRCRAFT
MPN: AT0022-01
AirCraft Buffing Wheel For Air Tyre Buffer (AT0022-01)
At a Glance: Replacement buffing/scuffing wheel for the AirCraft AT0022—designed for controlled tyre roughing and surface keying before repairs or recapping.
The wheel is where the tyre buffer earns its keep. A fresh buffing wheel cuts cleaner, scuffs more evenly, and gives you the consistent surface profile you need for strong bonding during repairs and recapping preparation. When the wheel is worn or glazed, you end up working harder..
N$ 537.86
Ex VAT:N$ 467.70
Brand: AIRCRAFT
MPN: AT0023
AirCraft Air Die Grinder 6mm 4000rpm (AT0023)
At a Glance: 6mm collet with a fixed 4 000 rpm speed for controlled grinding and polishing.
The AirCraft AT0023 air die grinder is a practical pneumatic tool designed to give you flexible control for a wide range of grinding and polishing tasks.
With a non-variable speed set to 4 000 rpm and a 6mm collet, it’s ideal for workshops where steady, predictable performance matters—especially when working with rotary burrs, abrasives and polishing ..
N$ 941.85
Ex VAT:N$ 819.00
Brand: AIRCRAFT
MPN: AT0024
AirCraft Air Needle Scaler For Removing Paint, Rust, Dirt Or Welding Slag (AT0024)
At a Glance: Pneumatic needle scaler for aggressive surface cleaning—strips rust, paint and slag fast while reaching irregular shapes and tight areas.
Some jobs don’t need gentle sanding—they need controlled, rapid impact. The AirCraft AT0024 Air Needle Scaler is built for heavy-duty surface preparation where paint, rust, dirt and welding slag must go. Multiple hardened needles strike the surface at high fre..
N$ 1,272.76
Ex VAT:N$ 1,106.75
Brand: AIRCRAFT
MPN: AT0024-SK01
AirCraft Air Needle Scal. Service Kit Lift Rod Comp. (2,7,12-15) For AT0024 (AT0024-SK01)
At a Glance: Lift rod and sealing component service kit (Parts 2, 7, 12–15) for the AirCraft AT0024—helps restore airtight control and consistent scaling action.
Needle scalers are brutally effective tools, but they rely on a small set of internal control and sealing parts to keep that rapid impact action consistent. When those seals wear or the lift rod components get tired, you’ll notice it quickly:..
N$ 29.33
Ex VAT:N$ 25.50
Brand: AIRCRAFT
MPN: AT0024-SK02
AirCraft Air Needle Scal. Service Kit Repl. Needles 12pce (9) For AT0024 (AT0024-SK02)
At a Glance: 12-piece replacement needle set (Part 9) for the AirCraft AT0024—restores aggressive cleaning action for rust, paint and welding slag removal.
Needle scalers are only as effective as the needles doing the striking. Over time, needles wear down, round off, or shorten—meaning less bite, slower cleaning, more vibration, and more time spent on a job that should’ve been quick.
The AirCraft AT002..
N$ 58.77
Ex VAT:N$ 51.10
Brand: AIRCRAFT
MPN: AT0024-SK03
AirCraft Air Needle Scal. Service Kit Barrel & Housing (1,11) For AT0024 (AT0024-SK03)
At a Glance: Replacement barrel and housing components (Parts 1 & 11) for the AirCraft AT0024—restores tool structure, alignment and dependable scaling performance.
A needle scaler hits hard—by design. That repeated impact loads the barrel and housing constantly, and over time the tool body can take wear, thread damage, knocks, or distortion that affects alignment. When the body isn’t straight and secure..
N$ 375.71
Ex VAT:N$ 326.70
Brand: AIRCRAFT
MPN: AT0024-SK04
AirCraft Air Needle Scal. Service Kit Trigger Comp. (16-17) For AT0024 (AT0024-SK04)
At a Glance: Trigger and pin component kit (Parts 16 & 17) for the AirCraft AT0024—restores smooth trigger action and dependable control during scaling.
A needle scaler is a high-impact tool, so control matters. If the trigger is bent, loose, sticky, or not returning properly, the tool becomes harder to manage and less predictable—especially when you’re working around welds, edges, or tight spaces.
The Ai..
N$ 18.29
Ex VAT:N$ 15.90
Brand: AIRCRAFT
MPN: AT0024-SK05
AirCraft Air Needle Scal. Service Kit Valve / Piston / Cylinder (3-6) For AT0024 (AT0024-SK05)
At a Glance: Valve, piston and cylinder service kit (Parts 3–6) for the AirCraft AT0024—restores internal drive efficiency for stronger, smoother scaling performance.
If a needle scaler loses its punch, the problem is usually deeper than the needles. The heart of the tool is its valve and piston system—controlling airflow and converting it into the rapid, hard-hitting reciprocating motion that st..
N$ 481.45
Ex VAT:N$ 418.65
Brand: AIRCRAFT
MPN: AT0024-SK06
AirCraft Air Needle Scal. Service Kit Rod & Needle Seat (8,10) For AT0024 (AT0024-SK06)
At a Glance: Rod and needle seat kit (Parts 8 & 10) for the AirCraft AT0024—supports correct needle seating for smoother movement and consistent scaling impact.
A needle scaler works by converting rapid internal motion into a controlled “hammering” of the needle bundle. For that to happen cleanly, the needles must sit correctly and move freely. When the rod or needle seat wears, you can get uneven strik..
N$ 140.99
Ex VAT:N$ 122.60
Brand: AIRCRAFT
MPN: AT0025
Angle grinder - Ø 180mm
Professional pneumatic angle grinder for ø 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil.....
N$ 5,535.18
Ex VAT:N$ 4,813.20