Power Tools
Brand: AIRCRAFT
MPN: AT0007-SK06
AirCraft Air Die Grinder Service Kit – Rotar & Cylinder Comp. (18/20/22/24/25) For AT0007 (AT0007-SK06)
At a Glance: Rotor and cylinder component kit for AirCraft AT0007 1/4" die grinder – replaces core air motor parts to restore power and smoothness.
When a die grinder loses its “bite”, the issue is often inside the air motor—wear on the rotor, cylinder, or related components reduces sealing efficiency and torque. The AirCraft AT0007-SK06 service kit replaces the rotor and cylinder components..
N$ 128.23
Ex VAT:N$ 111.50
Brand: AIRCRAFT
MPN: AT0007-SK07
AirCraft Air Die Grinder Service Kit – Collet Fixing Comp. (27-29/31) For AT0007 (AT0007-SK07)
At a Glance: Collet fixing component kit for AirCraft AT0007 1/4" die grinder – renews the collet and retaining parts for secure accessory grip and smoother, safer operation.
If your die grinder accessories slip, don’t seat properly, or you notice extra run-out (wobble), the culprit is often a worn collet or damaged fixing parts. A strong, accurate collet setup is what keeps burrs, stones and cutters..
N$ 95.68
Ex VAT:N$ 83.20
Brand: AIRCRAFT
MPN: AT0007-SK08
AirCraft Air Die Grinder Service Kit – Collet (30) For AT0007 (AT0007-SK08)
At a Glance: Replacement collet for AirCraft AT0007 1/4" die grinder – restores proper clamping force and accurate accessory running.
The collet is the business end of a die grinder—if it’s worn, you’ll feel it immediately: accessories slip, wobble, or don’t clamp evenly. That means more vibration, less control, and a higher chance of damaging burrs and stones. The AirCraft AT0007-SK08 service kit replaces the collet f..
N$ 40.48
Ex VAT:N$ 35.20
Brand: AIRCRAFT
MPN: AT0007-SK09
AirCraft Air Die Grinder Service Kit – Rotor Blades (21) For AT0007 (AT0007-SK09)
At a Glance: Rotor blade replacement kit for AirCraft AT0007 1/4" die grinder – refreshes the air motor’s vanes for better sealing and stronger performance.
Rotor blades (also called vanes) are the consumable “muscle fibres” inside a pneumatic motor. As they wear, chip, or glaze over, the motor can lose sealing efficiency—leading to sluggish spin-up, lower power, uneven running, and that tired feeling under load...
N$ 17.71
Ex VAT:N$ 15.40
Brand: AIRCRAFT
MPN: AT0009
1/3 sheet orbital sander - 95x175mm
The orbital sander, also known as a Jitterbug, makes use of 1/3 sheet
abrasives that can be securely held in place with locking clamps in the front
and back.
A dead man's throttle switch is fitted on top for safety. The sander has a
contoured palm grip that allows for one handed sanding.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line..
N$ 1,145.40
Ex VAT:N$ 996.00
Brand: AIRCRAFT
MPN: AT0010
Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing pad:
FLEX 32315
SPC00110....
N$ 1,431.18
Ex VAT:N$ 1,244.50
Brand: AIRCRAFT
MPN: AT0010-SK01
AirCraft Air Sander Service Kit O-rings (3/5/7/11/15/24/29) For Air Sander Model AT0010
At a Glance: Matched O-ring seal refresh set (plus gasket as pictured) for AirCraft AT0010 air sander servicing.
Give your AirCraft AT0010 air sander its “new tool” feel again. This service kit supplies the replacement O-rings used on key sealing points (reference positions 3, 5, 7, 11, 15, 24 and 29) to help stop air leaks, stabilise performance and keep the motor running efficiently. Ideal for routine..
N$ 18.75
Ex VAT:N$ 16.30
Brand: AIRCRAFT
MPN: AT0010-SK02
AirCraft Air Sander Service Kit Housing Covers Top/front (2/30) For Air Sander Model AT0010
At a Glance: Replacement top and front housing covers (positions 2 and 30) to refresh protection, fit and usability on the AirCraft AT0010 air sander.
Refresh the look, feel and protection of your AirCraft AT0010 air sander with this housing cover service kit. Designed for the parts diagram reference positions 2 and 30, this kit replaces the top cover and front housing cover shown in the product ima..
N$ 91.77
Ex VAT:N$ 79.80
Brand: AIRCRAFT
MPN: AT0010-SK03
AirCraft Air Sander Service Kit Orbit Wheel Comp. (34/35/36/37/38/39-41) For Air Sander Model AT0010
At a Glance: Orbit wheel component refresh kit (positions 34–41) to bring back smooth orbit motion and consistent sanding performance on the AirCraft AT0010.
When an air sander starts vibrating oddly, sanding unevenly, or feeling “notchy”, the orbit mechanism is often the culprit. The AirCraft AT0010-SK03 service kit supplies the orbit wheel components referenced as 34, 35, 36, 37, 38, 39 a..
N$ 184.00
Ex VAT:N$ 160.00
Brand: AIRCRAFT
MPN: AT0010-SK04
AirCraft AT0010 Air Sander Service Kit Bearing seat Comp. (42-46) For Air Sander Model AT0010
At a Glance: Bearing seat component kit (positions 42–46) including bearing and retaining hardware to restore smooth running on the AirCraft AT0010 air sander.
If your AirCraft AT0010 air sander starts to feel rough, noisy, or develops play in the rotating assembly, the bearing area is a prime suspect. The AT0010-SK04 service kit supplies the bearing seat components referenced as 42 to 46 on the A..
N$ 85.33
Ex VAT:N$ 74.20
Brand: AIRCRAFT
MPN: AT0010-SK05
AirCraft AT0010 Air Sander Service Kit Rotor/cylinder Comp. (20-23/25/27/28) For Air Sander Model AT0010
At a Glance: Core motor refresh kit with rotor/cylinder components (positions 20–23, 25, 27 and 28) to bring back smooth power and stable running on the AirCraft AT0010.
When an air sander loses punch, starts surging, or sounds rough under load, the internal motor components are often worn or contaminated. The AirCraft AT0010-SK05 service kit supplies the rotor and cylinder components r..
N$ 440.45
Ex VAT:N$ 383.00
Brand: AIRCRAFT
MPN: AT0010-SK06
AirCraft AT0010 Air Sander Service Kit Trigger Comp. (4/6/8-10/18/19) For Air Sander Model AT0010
At a Glance: Trigger and throttle control refresh kit (positions 4, 6, 8–10, 18 and 19) to restore smooth actuation and dependable control on the AirCraft AT0010.
A sticky trigger, inconsistent start-up, or air leaking around the control valve can turn a great air sander into a frustration machine. The AirCraft AT0010-SK06 service kit supplies the trigger components referenced as 4, 6, 8, 9, 1..
N$ 88.09
Ex VAT:N$ 76.60