AIR ORBITAL SANDER - JITTERBUG ( PAD 95MM X 175 MM)
Click Image for Gallery
1/3 sheet orbital sander - 95x175mm
The orbital sander, also known as a Jitterbug, makes use of 1/3 sheet abrasives that can be securely held in place with locking clamps in the front and back.
A dead man's throttle switch is fitted on top for safety. The sander has a contoured palm grip that allows for one handed sanding.
A compressor is required with an air flow delivery of at least 170 l/min at 6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Features:
- Dead man's switch for safety
- Palm grip to allow for one handed sanding
- Locking clamps in front and back
- Rear fitted exhaust
Application examples:
- Sanding with 1/3 sheet abrasives
| Description | Specification |
| Working pressure | 6.3 Bar |
| Free speed | 8 000 rpm |
| Average air consumption | 170 l/min |
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|