MAG BASE AUTO 55MM DRILL 510RPM 16500N 230MM STROKE 220V MULTI FUNCT
Out Of Stock
Click Image for Gallery
55mm MAGNETIC BASE DRILL 16500N
The magnetic base drill is fitted on a strong dual-coil magnet with a maximum core drill capacity of 55mm.
With the added auto-feed function with auto-stop, the drill no longer needs variable speed. Instead, it automatically adjusts the feed speed according to the load.
Application:
- Building construction
- Bridge construction
- Ship/Marine Construction
- Annular cutters or twist drill bits
- Horizontal or overhead drilling
Great for horizontal, side face and top face drilling
Features:
- Soft start motor
- Auto stop after return
- Strong dual coil magnet
- With overload protection
- High efficiency and light weight
- Fully automatic drilling and return
- Cooling and lubrication integrated
- Auto adjusted feed speed according to the load
- Integrated slide and gearbox provides high accuracy and minimal vibration
- Horizontal level, side face and top face drilling
Download the Exploded view:
View the Exploded view:
Download the Instruction Manual:
View the Instruction Manual:
Download the Spec Sheet:
View the Spec Sheet:
Download the Leaflet:
View the Leaflet:
| Description | Specifications |
| Rated voltage & frequency | 220V-240V @ 50-60 Hz |
| Cable length | 2.5m |
| Core drill capacity | Ø 55mm |
| Rated imput power | 1700W |
| No-Load speed | 280/510 rpm |
| Maximum magnetic attraction | 16000N |
| Cutting depth | 40mm |
| Stroke | 230mm |
| Magnet Dimensions | 166(L) x 80(W) x 50(H) mm |
Getting the best out of a Magnetic base drill:
- Always wear proper safety PPE (Personal Protective Equipment).
- Ensure the machine is switched off and unplugged from the power supply when changing or adjusting the cutting bits.
- During machine operation the cutters and drill bits must be lubricated and cooled with a suitable cutting fluid.
- Ensure the surface where the machine will be placed on is level, rust free and clean of any varnish or paint.
- Do not try and use the magnetic drill on a non-magnetic surface.
- Do not use the magnetic drill on a structure where welding is in progress as it could cause damage to the machine.
- Always use core drill bits with a pilot pin
