Sanders / Polishers

Festool Auxiliary handle ZG-LHS 225 Order number: FES496916 Model: ZG-LHS 225 ....

Tork Craft Armature (24) For POL06-2G At a Glance: Genuine replacement motor armature for the Tork Craft POL06-2G 1500W 180mm polisher The Tork Craft armature (Cat No. POL06-2G-SK11) is a genuine replacement motor armature designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. The armature is the rotating core of the motor – once it becomes burnt, shorted, mechanically damaged or badly worn, the machine can lose power, spark excessively, overheat or fail ..

Tork Craft Armature Front Bearing & Screws (10–23) For POL06-2G At a Glance: Genuine armature front bearing and screws kit for the Tork Craft POL06-2G polisher The Tork Craft armature front bearing and screws kit (Cat No. POL06-2G-SK10) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher. The front bearing supports the nose of the armature, while the matching screws keep the bearing securely clamped in position. When the bearing wears or the fastene..

Tork Craft Armature Rear Bearing & Buffel (25-28) For POL06-2G At a Glance: Genuine rear bearing and buffel kit for the Tork Craft POL06-2G polisher This Tork Craft armature rear bearing and buffel kit (Cat No. POL06-2G-SK02) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher. The rear bearing supports the back of the armature, while the buffel (rear support/insulator) helps locate and protect the assembly inside the housing. When these components ..

Tork Craft Bearing And Retainer (26/27) For MY3015-2 At a Glance; Genuine bearing and retainer kit for MY3015-2 polisher The Tork Craft Bearing And Retainer (26/27) For MY3015-2 is a genuine replacement kit designed to keep your polisher or burnishing machine running smoothly. Bearings work hard under load and can eventually wear out, leading to extra noise, vibration and reduced performance. This MY3015-2-SK05 kit replaces the bearing and its matching retainer (identi..

Tork Craft Brush Pair, Brush Holder & Coil Spring (47–49) For POL06-2G At a Glance: Complete brush, holder and spring kit for the Tork Craft POL06-2G polisher The Tork Craft brush pair, brush holder and coil spring kit (Cat No. POL06-2G-SK04) is a genuine service kit for the Tork Craft POL06-2G 1500W 180mm polisher. Carbon brushes and their springs are wear components – as they shorten or lose tension, you may notice power loss, intermittent running, excess sparking or a burnin..

Festool Brush segment BS-LHS 225 Order number: FES495166 Model: BS-LHS 225 ....

Festool Brush strip BE-LHS 225 Order number: FES495167 Model: BE-LHS 225 ....

Tork Craft Capacitance & Cable Complete Set (33/41–44) For POL06-2G At a Glance: Genuine capacitor and cable set for the Tork Craft POL06-2G polisher The Tork Craft capacitance and cable complete set (Cat No. POL06-2G-SK13) is a genuine replacement kit for the Tork Craft POL06-2G 1500 W 180 mm polisher. This set includes the key electrical components in positions 33 and 41–44, typically covering the power cable, strain relief, connector hardware and capacitor assembly. With time, cab..

Festool Carrying harness TG-LHS 225 Order number: FES496911 Model: TG-LHS 225 ....

Tork Craft Complex Armature & Bearing Kit (28/32-36) Service Kit (TCCS0185-SK06) At a Glance: Complex armature (rotor) and bearing component kit (parts 28 and 32–36) for the Tork Craft TCCS0185 cut-off saw When a cut-off saw starts losing punch, running rough, or sounding like it’s chewing gravel, the rotating motor components are often the culprit. The armature (rotor) is the spinning heart of the motor, and the bearings keep that rotation smooth and correctly aligned. If bearings are wor..