Power Tools

Tork Craft Imp. Selector Knob & Change Over Plate (13/14) Service Kit For TCID0850 At a Glance: Replacement selector knob and change-over plate (parts 13 and 14) for forward/reverse control on the Tork Craft TCID0850 If your impact driver’s forward/reverse selector feels loose, sticks, or won’t engage cleanly, the tool becomes frustrating fast (and a little bit unsafe—because “surprise direction” is never a feature). The Tork Craft TCID0850-SK03 Imp. Selector Knob & Change Over Plate servi..

Tork Craft Armature & Bearing Kit (12/16-18) Service Kit For TCID0850 At a Glance: Replacement armature and bearing components (part 12 and parts 16–18) for the Tork Craft TCID0850 impact driver The armature is the spinning heart of your impact driver’s motor. When it’s damaged—or when its bearings are worn—the tool starts telling on itself: rough running, extra noise, reduced power, overheating, and sometimes that unmistakable “electrical smell” nobody wants. The Tork Craft TCID0850-SK04 ..

Tork Craft Imp. Drill Stator (19) Service Kit For TCID0850 At a Glance: Replacement stator (part 19) service kit for the Tork Craft TCID0850 impact driver motor When an impact driver starts losing power, running hot, or tripping out unexpectedly, the fault isn’t always in the brushes or switch—sometimes the motor’s stationary windings (the stator) are the real culprit. The Tork Craft TCID0850-SK05 Imp. Drill Stator service kit replaces the stator component (part 19), restoring the magnetic..

Tork Craft Inductance Long & Short (21/22) Service Kit For TCID0850 At a Glance: Replacement inductance components (parts 21 and 22) for the Tork Craft TCID0850 impact driver electrical system Inside many power tools, inductance coils (often called chokes) do an unglamorous but important job: they help smooth electrical behaviour, reduce interference, and protect the tool’s electrical system from spikes and noise created during operation. If your TCID0850 has electrical faults, intermitten..

Tork Craft Imp. Drill Carbon Brush Pair (23) Service Kit For TCID0850 At a Glance: Replacement carbon brush pair (part 23) for the Tork Craft TCID0850 impact driver motor Carbon brushes are the “contact point” between your power source and the spinning armature inside the motor. When they wear down, the tool starts complaining—weak power, intermittent running, excessive sparking, and sometimes a refusal to start unless you coax it. The Tork Craft TCID0850-SK07 Imp. Drill Carbon Brush Pair ..

Tork Craft Brush Holder Set (24/25) Service Kit For TCID0850 At a Glance: Replacement brush holder set (parts 24 and 25) for the Tork Craft TCID0850 impact driver Fresh carbon brushes are only half the story—if the brush holders are cracked, worn, or letting the brushes bind, the motor won’t get clean contact and performance can drop fast. The Tork Craft TCID0850-SK08 Brush Holder Set service kit replaces the brush holder components (parts 24 and 25), restoring proper brush alignment and s..

Tork Craft Repl. Trigger Compl. Kit (26-28) Service Kit For TCID0850 At a Glance: Replacement trigger complete kit (parts 26–28) for the Tork Craft TCID0850 impact driver A worn trigger turns a perfectly good impact driver into a temperamental gremlin—starts and stops when it feels like it, has dead spots, or refuses to hold a steady speed. The Tork Craft TCID0850-SK09 Repl. Trigger Compl. kit replaces the trigger components (parts 26–28), restoring proper control response and more dependa..

Tork Craft Repl. Cable & Sheath (29/30) Service Kit For TCID0850 At a Glance: Replacement cable and protective sheath components (parts 29 and 30) for the Tork Craft TCID0850 impact driver Cables live a hard life in the workshop—flexed, pulled, snagged, and sometimes “repaired” with tape and hope. If your impact driver’s cable is damaged or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID0850-SK10 Repl. Cable & Sheath service ..

Tork Craft Housing L/R With Screws (31/33) Service Kit For TCID0850 At a Glance: Replacement left and right housing with screws (parts 31 and 33) for the Tork Craft TCID0850 impact driver An impact driver’s housing does a lot more than look pretty. It protects the motor and wiring, supports internal components, and gives you the grip and structure needed to control the tool under repeated impact loads. If your TCID0850 housing is cracked, stripped at the screw bosses, or no longer closing ..

Tork Craft Output Shaft & Bearing Compl. (3-6/9) Service Kit For TCID1100 At a Glance: Output shaft and bearing complete assembly (parts 3–6 and 9) for the Tork Craft TCID1100 If your impact tool starts feeling rough, noisy, or develops play at the output, the output shaft and bearing area is often where the trouble lives. These components carry load, keep alignment true, and transfer torque from the gearbox to the bit. The Tork Craft TCID1100-SK01 Output Shaft & Bearing Compl. service kit..

Tork Craft Gearbox Housing With Screws (7/8) Service Kit For TCID1100 At a Glance: Replacement gearbox housing with screws (parts 7 and 8) for the Tork Craft TCID1100 The gearbox housing is the structural cradle that keeps the gears aligned and protected while the tool delivers torque and impact forces. If the housing is cracked, stripped, or no longer seating correctly, the gearbox can develop play, noise and premature wear. The Tork Craft TCID1100-SK02 Gearbox Housing With Screws service..