Power Tools

Tork Craft Gearbox Housing With Screws (7/8) Service Kit For TCID1100 At a Glance: Replacement gearbox housing with screws (parts 7 and 8) for the Tork Craft TCID1100 The gearbox housing is the structural cradle that keeps the gears aligned and protected while the tool delivers torque and impact forces. If the housing is cracked, stripped, or no longer seating correctly, the gearbox can develop play, noise and premature wear. The Tork Craft TCID1100-SK02 Gearbox Housing With Screws service..

Tork Craft Gear Selector Knob Compl. (11-15) Service Kit For TCID1100 At a Glance: Gear selector knob complete assembly (parts 11–15) for the Tork Craft TCID1100 When the gear selector starts slipping, sticking, or won’t engage properly, you lose the ability to match speed and torque to the job—meaning more strain on the tool and less control for you. The Tork Craft TCID1100-SK03 Gear Selector Knob Compl. service kit replaces the gear selector components (parts 11–15), restoring positive s..

Tork Craft Gear Set With Bearing Compl. (16-25) Service Kit For TCID1100 At a Glance: Gear set with bearing complete assembly (parts 16–25) for the Tork Craft TCID1100 gearbox When a gearbox starts grinding, slipping, or sounding “dry and unhappy,” it’s usually because the gears and bearings that carry load are worn, damaged, or contaminated. The Tork Craft TCID1100-SK04 Gear Set With Bearing Compl. service kit replaces the key gearbox drive components (parts 16–25), restoring proper engag..

Tork Craft Imp. Selector Knob & Change Over Plate (26-28) Service Kit For TCID1100 At a Glance: Replacement selector knob and change-over plate kit (parts 26–28) for forward/reverse control on the Tork Craft TCID1100 Forward/reverse selection should feel definite—click, engage, done. If your TCID1100 selector is loose, sticky, or won’t shift cleanly, you can end up with partial engagement (which is the mechanical version of “maybe”) and that’s bad for control and for internal parts. The To..

Tork Craft Intermediate Spindle & Helical Gear Kit (29-34) Service Kit For TCID1100 At a Glance: Intermediate spindle and helical gear kit (parts 29–34) for the Tork Craft TCID1100 gearbox drive train Inside the TCID1100 gearbox, the intermediate spindle and helical gear components do the heavy lifting of transferring power smoothly through the gear train. When these parts wear, you’ll often notice extra noise, rough running, slipping under load, or that “gritty” feel that suggests the gea..

Tork Craft Armature & Bearing Kit (38-40) Service Kit For TCID1100 At a Glance: Replacement armature and bearing kit (parts 38–40) for the Tork Craft TCID1100 motor The armature is the spinning engine inside your impact drill/driver, and its bearings are what keep that rotation smooth and stable. When the armature is damaged—or bearings start to rumble—the tool can lose power, run hot, spark excessively, and develop that rough “something’s not right” feel. The Tork Craft TCID1100-SK07 Arma..

Tork Craft Imp. Drill Stator (41) Service Kit For TCID1100 At a Glance: Replacement stator (part 41) service kit for the Tork Craft TCID1100 motor The stator is the stationary half of the motor that creates the magnetic field your tool needs to make torque. When stator windings are damaged, burnt, or shorted, the symptoms are usually loud and clear: reduced power, overheating, intermittent running, tripping, and that tell-tale “electrical” smell. The Tork Craft TCID1100-SK08 Imp. Drill Sta..

Tork Craft Brush Holder Set (42/44-46) Service Kit For TCID1100 At a Glance: Replacement brush holder set (parts 42 and 44–46) for the Tork Craft TCID1100 motor Carbon brushes can only do their job if they slide freely and stay correctly aligned against the commutator. If the brush holders are cracked, heat-damaged, worn, or packed with carbon dust, brushes can bind or sit skew—causing weak power, intermittent running and excessive sparking. The Tork Craft TCID1100-SK09 Brush Holder Set se..

Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100 At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100 At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100 Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry point, or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ..

Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100 At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100 The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw points, or no longer closing properly, the tool can ..