Spare Parts

Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit At a Glance: Auto feed motor assembly replacement set (parts 31–38) for stand powered-feed servicing Auto feed is one of those features you only truly appreciate when it stops behaving. If the powered feed becomes weak, erratic, noisy, or stops driving smoothly, the issue is often within the motor assembly and its related components. The Tork Craft Auto Feed Motor Complete Set (31-38) Stand Service Kit groups the parts reference..

Tork Craft Circuit Board with Clamp Ring (49 50) Stand Service Kit At a Glance: Replacement circuit board and clamp ring set (parts 49 & 50) for stand electronic control servicing When an electronic feed system starts acting haunted — cutting in and out, refusing to respond, running inconsistently, or behaving differently each time you power up — the culprit is often the control electronics rather than the mechanical parts. The Tork Craft Circuit Board with Clamp Ring Stand Service Kit replace..

Tork Craft Replacement Fuse (62) Stand Service Kit At a Glance: Replacement fuse (part 62) for stand electrical protection and reliable operation A fuse is the tiny hero that sacrifices itself so the expensive electronics don’t have to. When the stand’s electrical system suddenly goes dead, won’t power up, or stops responding after a surge or overload, a blown fuse is often the first (and best) thing to check. The Tork Craft Replacement Fuse (62) Stand Service Kit is a direct spare part refere..

Tork Craft Magnet and Motor Switch Set (61 63) Stand Service Kit At a Glance: Replacement magnet and motor switch set (parts 61 & 63) for safe control and dependable operation Magnetic base drills don’t do “maybe” — the magnet and motor controls need to be positive, reliable and consistent every single time. If a switch feels loose, sticks, arcs, becomes intermittent, or simply refuses to behave, it’s time to replace it before it becomes a safety problem. The Tork Craft Magnet and Motor Switch..

Tork Craft Gasket & Water Seal Compl. (1-9) Motor Service Kit (TCMD0035-SK01) At a Glance: Complete gasket and water seal set for motor assembly parts (1-9) on TCMD0035 series mag base drills. When coolant, swarf, and workshop grime start sneaking into places they shouldn’t, seals are usually the first suspects. The Tork Craft TCMD0035-SK01 Gasket & Water Seal Complete Motor Service Kit replaces the key sealing components referenced as parts (1–9) in the motor assembly—helping you restore ..

Tork Craft Spindle & Key Set (10,13,16-18) Motor Service Kit (TCMD0035-SK02) At a Glance: Replacement spindle and key set for motor assembly reference parts (10, 13, 16–18) on TCMD0035 series mag base drills. The spindle is where the hard work gets handed over—turning motor power into reliable rotation under load. When a spindle or drive key starts wearing, you’ll often feel it as play, rough running, inconsistent drive, or premature wear on neighbouring components. The Tork Craft TCMD0035..

Tork Craft Bearing Kit & Oil Ring (11, 14, 21) Motor Service Kit (TCMD0035-SK03) At a Glance: Bearing kit and oil ring components for motor assembly reference parts (11, 14, 21) on TCMD0035 series mag base drills. Bearings are the quiet heroes of any power tool—until they aren’t quiet anymore. If your mag base drill starts sounding rough, feeling gritty, or showing extra vibration under load, tired bearings are often the culprit. The Tork Craft TCMD0035-SK03 Bearing Kit & Oil Ring Motor Se..

GEARBOX WITH SCREWS (12/24) MOTOR SERVICE KIT....

Tork Craft Gear & Gear Cover (15, 19, 20) Motor Service Kit (TCMD0035-SK05) At a Glance: Replacement gear and gear cover components for motor assembly reference parts (15, 19, 20) on TCMD0035 series mag base drills. When your mag base drill starts sounding harsher than usual, or the drive feels inconsistent under load, the gear train is often where the story is written. Worn gear teeth and tired cover components can lead to noisy engagement, uneven power transfer, and accelerated wear. The..

Tork Craft Dove Tail Block With Screw (22, 23) Motor Service Kit (TCMD0035-SK07) At a Glance: Replacement dove tail block and screw for motor assembly reference parts (22, 23) on TCMD0035 series mag base drills. A mag base drill is only as accurate as the parts that keep everything aligned and locked in place. If the sliding action feels sloppy, the assembly won’t hold adjustment, or you’re fighting unwanted movement under load, the dovetail block area is a likely culprit. The Tork Craft T..

Tork Craft Bearing Kit For Armature (30, 32) Motor Service Kit (TCMD0035-SK08) At a Glance: Replacement armature bearing kit for motor assembly reference parts (30, 32) on TCMD0035 series mag base drills. Armature bearings do more than “just spin” — they keep the motor’s rotating core centred, stable, and efficient. Once they start wearing, you’ll often notice a rough sound, extra vibration, heat build-up, or even brush wear that seems to appear out of nowhere. The Tork Craft TCMD0035-SK08..

Tork Craft Armature (31) Motor Service Kit (TCMD0035-SK09) At a Glance: Replacement armature for motor assembly reference part (31) on TCMD0035 series mag base drills (QE/WO variants as specified). The armature is the heart of the motor—the spinning core that turns electrical power into real drilling muscle. When an armature is burnt, shorted, scored, or running out of true, the tool can lose power, run rough, spark excessively at the brushes, or trip out under load. The Tork Craft TCMD003..