Spare Parts

Tork Craft Coolant Bottle With Cap (1/2) Stand Service Kit (TCMD0035-50HD-SK13) At a Glance:; Replacement coolant bottle with cap for the TCMD0035-50HD—diagram parts (1/2) for cleaner, more reliable wet drilling. Wet drilling is brilliant… right up until the coolant bottle starts leaking, the cap won’t seal, or the bottle gets damaged and you end up with more mess than cooling. The Tork Craft TCMD0035-50HD-SK13 Coolant Bottle With Cap Stand Service Kit replaces the components ..

Tork Craft Coolant Valve With Pipe & Coupling (3/4/5) Stand Service Kit (TCMD0035-50HD-SK14) At a Glance: Replacement coolant valve assembly with pipe and coupling for the TCMD0035-50HD—diagram parts (3/4/5) for reliable flow control during wet drilling. Coolant is only useful if you can control it. A stuck valve, leaking coupling, or cracked pipe quickly turns “nice clean cooling” into “why is my bench a swimming pool?” The Tork Craft TCMD0035-50HD-SK14 Coolant Valve With Pip..

Tork Craft Bearing & Gear Set (18-23) Stand Service Kit (TCMD0035-50HD-SK15) At a Glance: Replacement bearing and gear set for the TCMD0035-50HD stand—diagram parts (18–23) to restore smooth feed and reliable engagement. A mag base drill stand should feel solid and smooth: controlled feed, predictable engagement, and no “crunchy” surprises when you wind the handle. When bearings wear or gears start to round off, you’ll notice rough travel, extra play, noisy operation, or incon..

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035-50HD-SK16) At a Glance: Replacement pinion shaft and key for the TCMD0035-50HD stand—diagram parts (24/25) for positive drive and smooth feed control. The pinion shaft is a small part with a big job: it transfers your handle input into controlled feed movement through the stand’s gear system. If the shaft is worn or the key is damaged, you can get slipping, uneven feed, extra play, or that nasty “jump” feeling t..

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035-50HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035-50HD stand—diagram parts (26–28) for comfortable grip and positive feed control. A feed handle is where you and the machine meet. If it’s cracked, loose, bent, or missing, you lose control and the stand becomes awkward (and unsafe) to operate—especially under load. The Tork Craft TCMD0035-50HD-SK17 Replacement Handle Stand Service Kit replaces ..

Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035-50HD-SK18) At a Glance: Replacement panel plate with screws for the TCMD0035-50HD stand—diagram parts (36, 37, 39, 40 and 48) for secure mounting and proper protection. The panel plate does two important jobs: it keeps the control area properly protected and it holds components in the correct position so everything lines up, fits neatly, and stays secure under vibration. If the plate is cracked, be..

Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035-50HD-SK19) At a Glance: Replacement speed control and motor switch components for the TCMD0035-50HD—diagram parts (38 and 41–47) for stable control and dependable operation. When speed control starts hunting, cutting out, or behaving unpredictably, it’s not just frustrating—it can ruin cutters, overload the motor, and make controlled drilling far harder than it should be. The Tork Craft TCMD0035-50H..

Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035-50HD-SK20) At a Glance: Genuine replacement fuse for the TCMD0035-50HD—diagram part (44) for circuit protection and power restoration. A fuse is the tool’s built-in “circuit breaker”: it sacrifices itself to protect wiring and electronics when an overload or fault occurs. If your Tork Craft TCMD0035-50HD suddenly won’t power up, cuts out unexpectedly, or shows no signs of life, a blown fuse is a common (and thankfull..

Tork Craft Repl. Handle/Pinion/Gear/Bearing (1–23) Service Kit At a Glance: ; Replacement drive-side components covering parts 1–23 for the TCMD0055QE magnetic base drill. When a magnetic base drill starts feeling rough, noisy, or “notchy” through the feed handle, it’s usually the drive-side parts begging for attention. This Tork Craft service kit replaces the key handle/pinion/gear/bearing components (parts 1–23) that keep the feed and drivetrain running smoothly. It’s the right move when..

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit At a Glance: ; Replacement pinion shaft and key set covering stand parts 10-13 for the TCMD0055QE. If the feed action on your magnetic base drill feels sloppy, uneven, or starts slipping under load, the pinion shaft and key are prime suspects. This Tork Craft Pinion Shaft & Key stand service kit (parts 10-13) is made to restore solid engagement in the feed/drive mechanism on the TCMD0055QE, helping you get back to controlled, confiden..

Tork Craft Top Mandrel Set (1-5) Stand Service Kit At a Glance: Top mandrel component set (parts 1–5) for stand service and restoration When a stand starts feeling “notchy”, develops side-play, or the feed action just doesn’t feel as precise as it used to, the top mandrel area is often where the gremlins live. The Tork Craft Top Mandrel Set (1-5) Stand Service Kit is a purpose-made spare parts set designed to replace the top mandrel components referenced as parts 1–5 in the stand assembly brea..

Tork Craft Gear, Bearing & Housing Set Complete (14-23) Stand Service Kit (TCMD0035-55QE-SK021) At a Glance: Replacement gear, bearing and housing set for the TCMD0035-55QE stand—diagram parts (14–23) to restore smooth feed, correct engagement and solid support. When a mag base drill stand starts feeling rough, loose or noisy, the problem is often a combination of worn gears, tired bearings and a housing that no longer supports everything tightly. That wear shows up as backlas..