BISCUIT JOINER 900W 11000RPM
Wattage: 900W
Cuts Slots for: #0, #10 & #20
Rotation speed: 11000 RPM
Application:
A biscuit joiner is a woodworking tool used to join two pieces of wood together. It uses a small circular saw blade to cut a crescent-shaped hole in the opposite edges of two pieces of wood or wood composite panels.
An oval-shaped, highly-dried and compressed wooden biscuit (made from beech wood) is covered with glue, or glue is applied in the slot. The biscuit is immediately placed in the slot, and the two boards are clamped together. The wet glue expands the biscuit, further improving the bond.
Benefits:
- The grain direction on the biscuits are diagonal to add strength to the joinery.
- The biscuit provides a quick means of getting a perfectly flush joint, while at the same time reinforcing the joint.
Biscuits for the biscuit joiner:
| ORDER NO. | SIZE | QTY |
| PC5551 | #0 | Box of 1000 |
| PC5552 | #10 | Box of 1000 |
| PC5553 | #20 | Box of 1000 |
| BIS010 | #10 | Box of 1000 |
| BIS020 | #20 | Box of 1000 |
| PC5551-50 | #0 | Pack of 50 |
| PC5552-50 | #10 | Pack of 50 |
| PC5553-50 | #20 | Pack of 50 |
| PC5553-100 | #20 | Pack of 100 |
| BIS378 | 378 Pc biscuit kit | |
Spares for the biscuit joiner:
| ORDER NO. | DISCRIPTION |
| TCP10008 | ø100x22.22xZ8 blade |
| CMT240.008.04 | ø100x22.22xZ8 blade |
| BJ01-3 | Field coil (stator) |
| BJ02-1 | Armature |
| BJ01-2 | Carbon brushes |
| BJ01-4 | Switch |
| BJ01-5 | Slide hook for switch |
Features
- Safety trigger switch
- Easily accessible carbon brush ports.
- Spindle lock button.
- Adjustable handle for added control.
- Quick adjustment on height, depth and angle.
- Dust collection system.
| Description | Specification |
| Max RPM | 11000 |
| Max Blade Diameter | 100mm |
| Bore diameter | 22mm |
| Spindle thread | M6 |
| Wattage | 900W |
| Voltage | 230V (50Hz) |
| Max depth cut | 19mm |
| Stop angle | 0° - 90°90° - 135° |
| Suitable biscuits | #0#10#20 |
| Power Cord length | 2m |
| Contents | Biscuit jointer 100mm cutting blade Hex wrench, 5mm Dust collection bag Spare set of carbon brushes |
| Packaging Type | Color cardboard box |
| Packaging weight | 2.9kg |
| Tool weight | 2.2kg |
| Packaging Dimensions | 410mm(L) x 200mm(H) x 185mm(W) |
| Tool Dimensions | 385mm(L) x 190mm(H) x 170mm(W) |
| Material | Gearbox: Aluminum Base Plate: Plastic Handle: Plastic Body: Plastic |
How to install the blades:
Installing the blades for the Biscuit Joiner is straightforward. Here's a step-by-step guide:
Step 1: Unplug the power cord, switch off the tool, and wait until all moving parts have completely stopped before making any adjustments.
Step 2: Undo the four screws at the bottom of the base plate and open the base plate.
Step 3: Keep the spindle lock button pressed in which is at the top of the joiner and turn the spindle until it locks. This prevents the blade from spinning.
Step 4: Undo the flange nut from the spindle with a hex key.
Step 5: Put the blade and flange on the spindle. Ensure that the arrow on the blade is matching the arrow on the joiner.
Step 6: Put the spindle nut on the spindle and tighten with a hex key.
Step 7: Release the spindle lock button and turn the spindle to verify that the blade can rotate freely..
Step 8: Place the base plate in position and tighten the four screws. Check that the base plate is properly fastened and secured before starting the tool.
By following these steps, you can safely and effectively install the blades for the Biscuit Joiner.