SCREW EXTRACTOR NO.4 CARDED

SCREW EXTRACTOR NO.4 CARDED
TorkCraft - Screw Extractor

Size: M11 - M14
Diameter: 5 0mm
Recommended Drill Size: 6.0 mm
Shank: 6.0mm Square Shank

Application:

The Tork Craft Screw Extractor is for the removal of broken bolts and studs, made of carbon steel. Determine the size of the bolt and the desired extractor size, use a file and flatten the broken bolt surface, usually bolts that broke are left with an uneven surface.

Locate the center on the flattened surface and mark with a center punch. Drill a pilot hole, start off with a small diameter and increase to the recommended drill size depending on the extractor size in use.

Insert the extractor into the pilot hole and using a tap wrench the bolt can now be extracted carefully, by turning the screw extractor anti-clockwise.

  • Carbon Steel
  • Quick & Easy removal of broken bolts and studs

Recommended tap wrench:

  • NR9002C
  • NR9003C
  • NR9004C
  • NR9006C
WARNING: Using any tool can be dangerous. Always select the right tool for the job.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Specifications

Description Specifications
Size 5 mm
Cutting Length 29 mm
Length 75 mm
Shank 6.0 mm Square
  • Views: 97
  • Brand: TORK CRAFT
  • Product Code: TC SE04
  • Availability: 184
0 Product(s) Sold
  • N$ 26.57
  • Ex Tax: N$ 23.10

Tags: Screw Extractor, Brand TORK CRAFT