Countersinks
Brand: TORK CRAFT
MPN: T CS005
Countersink 5 Piece Set with Bit Holder
The odd number of flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or tapping operation thereby improving the finish of the product and removing any hazardous sh..
N$ 272.09
Ex VAT:N$ 236.60
Brand: TORK CRAFT
MPN: T CS101
Countersink HSS - 5Flute 6mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or t..
N$ 110.75
Ex VAT:N$ 96.30
Brand: TORK CRAFT
MPN: T CS102
Countersink HSS - 5Flute 3/8” 10mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 116.04
Ex VAT:N$ 100.90
Brand: TORK CRAFT
MPN: T CS103
Countersink HSS - 5Flute 1/2” 12mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 119.49
Ex VAT:N$ 103.90
Brand: TORK CRAFT
MPN: T CS104
Countersink HSS - 5Flute 5/8” 16mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 167.27
Ex VAT:N$ 145.45
Brand: TORK CRAFT
MPN: T CS105
Countersink HSS - 5Flute 5/8” 19mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 215.63
Ex VAT:N$ 187.50
Brand: TORK CRAFT
MPN: T CS201
Carbon Steel Countersink - 1/4” (6.35mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 56.29
Ex VAT:N$ 48.95
Brand: TORK CRAFT
MPN: T CS202
Carbon Steel Countersink - 3/8” (9.5mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving th..
N$ 58.02
Ex VAT:N$ 50.45
Brand: TORK CRAFT
MPN: T CS203
Carbon Steel Countersink - 1/2” (12.7mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 61.47
Ex VAT:N$ 53.45
Brand: TORK CRAFT
MPN: T CS204
Carbon Steel Countersink - 5/8" (15.9mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 71.70
Ex VAT:N$ 62.35
Brand: TORK CRAFT
MPN: T CS205
Carbon Steel Countersink - 3/4" (19mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving the..
N$ 75.10
Ex VAT:N$ 65.30
Brand: TORK CRAFT
MPN: T CS300
Countersink HSS
A countersink HSS (High-Speed Steel) is a type of cutting tool used primarily in machining and woodworking to create
a conical hole that allows the head of a screw or bolt to sit flush with or below the surface of the material.
Countersink tools are essential for various machining and assembly processes, offering both functionality and
precision in creating countersunk holes.
Application:
DIY
Construction
Deburring, smoothing holes in steel, plast..
N$ 159.51
Ex VAT:N$ 138.70