ADAPTOR SDS PLUS 200MMXM22 FOR DIAMOND CORE BITS
Click Image for Gallery
Adaptor - SDS Plus shank
Adaptor length:
200mm
Thread: M22
Connection type: SDS Plus
Application:
This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your rotary hammer.
Make sure the threads are the same as the Dry Cut Diamond Core Drill - M22 or M16.
Take note that there are 2 connection types:
- Hex
- SDS Plus
List of different adaptors:
1. Hex shank adaptors for the Dry Cut Diamond Core Drill range:
- Hex shank 70mm, M16 thread - TC18HEX1
- Hex shank 200mm, M16 thread - TC18HEX2
- Hex shank 300mm, M16 thread - TC18HEX3
- Drift key for removing the pilot drill - TC18KEY
- Pilot drill bit (not included with adaptors)- TC18PILOT
2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range:
- SDS Plus 70mm, M16 thread - TC18SDS1
- SDS Plus 200mm, M16 thread - TC18SDS2
- SDS Plus 300mm, M16 thread - TC18SDS3
- SDS Plus 70mm, M22 thread - TC18SDS4
- SDS Plus 200mm, M22 thread - TC18SDS5
- SDS Plus 300mm, M22 thread - TC18SDS6
- Drift key for removing the pilot drill - TC18KEY
- Pilot drill bit (not included with adaptors)- TC18PILOT
NOTE:
The pilot drill bit is not included with the adaptors and it is available
separately -
TC18PILOT
INFORMATION:
Use the drift key
TC18KEY to remove or replace the
pilot drill bit from the adaptors.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|