Diamond Cutting Blades
Brand: TORK CRAFT
MPN: TCDB10115
Diamond blade
TYPE:
Sintered and continuous
DIAMETER: ø115mm
BORE: Ø22.23mm
MAX RPM: 13,300
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segmen..
N$ 63.25
Ex VAT:N$ 55.00
Brand: TORK CRAFT
MPN: TCDB10300
Diamond blade
TYPE:
Hot press and segmented.
DIAMETER: ø300mm
BORE: Ø25.4mm
MAX RPM: 6,400
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segment..
N$ 1,175.24
Ex VAT:N$ 1,021.95
Brand: TORK CRAFT
MPN: TCDB11018-2
Continious Rim Diamond blade 180mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 248.63
Ex VAT:N$ 216.20
Brand: TORK CRAFT
MPN: TCDB1110180
Continuous Rim Diamond blade 180mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size to specific machines
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service life
It flushes out any ..
N$ 248.63
Ex VAT:N$ 216.20
Brand: TORK CRAFT
MPN: TCDB1110200
Continious Rim Diamond blade 200mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 273.53
Ex VAT:N$ 237.85
Brand: TORK CRAFT
MPN: TCDB1110230
Continious Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 265.94
Ex VAT:N$ 231.25
Brand: TORK CRAFT
MPN: TCDB1110230-2
Continious Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service life
It flushes out any debris to lessen fri..
N$ 273.53
Ex VAT:N$ 237.85
Brand: TORK CRAFT
MPN: TCDB1110230-3
Continious Thin Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Thin rim version. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allo..
N$ 397.27
Ex VAT:N$ 345.45
Brand: TORK CRAFT
MPN: TCDB1210115
Diamond blade
TYPE:
Hot press and continuous rim.
DIAMETER: ø115mm
BORE: Ø22.23mm
MAX RPM: 13,000
USE: Marble, granite, concrete, masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixtur..
N$ 169.05
Ex VAT:N$ 147.00
Brand: TORK CRAFT
MPN: TCDB1210350A
Diamond blade
TYPE:
Brazed and segmented
DIAMETER: ø350mm
BORE: Ø25.4mm
MAX RPM: 3280
USE: Asphalt
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. ..
N$ 1,648.18
Ex VAT:N$ 1,433.20
Brand: TORK CRAFT
MPN: TCDB1220115
Diamond blade
TYPE:
Hot press and segmented.
DIAMETER: ø115mm
BORE: Ø22.23mm
MAX RPM: 13,000
USE: Marble, granite, concrete, masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of ..
N$ 177.33
Ex VAT:N$ 154.20
Brand: TORK CRAFT
MPN: TCDB1220230
Diamond blade
TYPE:
Hot press and segmented.
DIAMETER: ø230mm
BORE: Ø22.23mm
MAX RPM: 6,600
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segmen..
N$ 639.80
Ex VAT:N$ 556.35