TORK CRAFT

Tork Craft Step Drill — HSS M2, 6–52 mm Packaging: Carded (for display) Transform one tool into many. This Tork Craft HSS M2 step drill gives you a 6 mm to 52 mm sized hole range in one bit—ideal for knockout holes, enlarging holes and working in sheet materials. With a high-speed steel body, smooth step geometry and carded retail packaging, it’s built for the job-site and the pro user.....

Tork Craft Step Drill — HSS M2, 6–60 mm Packaging: Carded (for display) Cover a broad range of hole sizes with one tool. This Tork Craft HSS M2 step drill spans from 6 mm up to 60 mm in progressive steps, giving you fast, clean holes in sheet metal, aluminium, copper, brass and plastic. With high-speed steel construction, designed for prolonged use, it’s ideal for workshops or industrial maintenance where versatility matters.....

Step drill set in metal case Use one drill for many holes. Multiple step and countersink tool for drilling and countersinking in one smooth operation. SIZE: Ø4-12mm STEP HEIGHT: 8mm STEEL: HSS (High-speed steel) SIZE: Ø4-20mm STEP HEIGHT: 5mm STEEL: HSS (High-speed steel) SIZE: Ø4-30mm; STEP HEIGHT: 5mm STEEL: HSS (High-speed steel) Application: The Tork Craft HSS Setp Drill, multiple step and countersink tool for drilling in sheet metals in one smooth operatio..

Step drill set Use one drill for many holes. Multiple step and countersink tool for drilling and countersinking in one smooth operation. SIZE: Ø3-13mm STEP HEIGHT: 4mm STEEL: HSS (High-speed steel) SIZE: Ø5-13mm STEP HEIGHT: 8mm STEEL: HSS (High-speed steel) SIZE: Ø6-19mm; STEP HEIGHT: 5mm STEEL: HSS (High-speed steel) Application: Suitable for materials with a maximum thickness of 4 to 6mm depending on the hardness. The best type of drill for steel plate. ..

TorkCraft - Stud Lock QTY: 1 | 10 gram Application: Thread locker for standard size threads, for use on brass / zinc / steel. Clean surface with an oil free cleaning solvent before applying adhessive. Use on: Brass Zinc Steel High Strength Anaerobic adhesive Directions: Clean the surface of all oil. Apply the glue to both surfaces. Parts can be handled after 40 minutes. Full strength after 120 minutes. WARNING: Clean surface with an..

TorkCraft - Stud Lock QTY: 1 | 50 gram Application: Thread locker for standard size threads, for use on brass / zinc / steel. Clean surface with an oil free cleaning solvent before applying adhessive. Use on: Brass Zinc Steel High Strength Anaerobic adhesive Directions: Clean the surface of all oil. Apply the glue to both surfaces. Parts can be handled after 40 minutes. Full strength after 120 minutes. WARNING: Clean surface with an..

Tork Craft Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For TCCS0355 At a Glance: Support bracket complete assembly (parts 2, 4, 12, 20–28, 30–38, 89–90) for the Tork Craft TCCS0355 When a cut-off saw starts feeling “loose”, misaligned, or inconsistent, the culprit is often the supporting bracketry that keeps everything sitting where it should. The Tork Craft TCCS0355-SK03 Support Bracket Compl. is the correct replacement assembly for the TCCS0355, covering the support bracket compone..

Tork Craft Switch & Capacitor Set (42/43/44/52/53) Service Kit (TCAG0115-SK13) At a Glance: Replacement switch and capacitor component set (parts 42, 43, 44, 52 & 53) for the Tork Craft TCAG0115 angle grinder When an angle grinder starts acting up—cutting out, refusing to start, running intermittently, or feeling “on/off” in the worst possible way—the problem is often in the electrical control chain. The Tork Craft TCAG0115-SK13 Switch & Capacitor Set Service Kit replaces the key control c..

Tork Craft Switch & Trigger (37–40) For POL06-2G At a Glance: Genuine replacement switch and trigger kit for the Tork Craft POL06-2G polisher The Tork Craft switch and trigger kit (Cat No. POL06-2G-SK05) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher. The switch is the heart of your control system – if it becomes sticky, intermittent or fails completely, the tool becomes frustrating or unsafe to use. This kit replaces the key switch and trigger..

Tork Craft Switch Assembly Compl. (27, 35-36) For TCRH0800 (TCRH0800-SK07) At a Glance: Complete switch assembly covering reference parts (27, 35 and 36) for the Tork Craft TCRH0800. When a rotary hammer refuses to start, cuts out mid-job, or only runs if you hold the trigger “just so”, the switch assembly is usually where the drama lives. Dust ingress, arcing, wear and hard site life can all take their toll on the trigger and internal contacts. The Tork Craft TCRH0800-SK07 Switch Assembly..

Tork Craft Switch Capacitor Kit (42-46) Service Kit (TCCS0185-SK12) At a Glance: Replacement switch and capacitor component kit (parts 42–46) for the Tork Craft TCCS0185 cut-off saw When a cut-off saw starts behaving like it has moods — cutting out under load, refusing to start, or running inconsistently — the switch and related electrical components are often on the suspect list. Capacitors (where used in the circuit) help stabilise electrical behaviour, while the switch is the main contr..