TORK CRAFT

TorkCraft - Wire Cup Brush Crimped Width: 60 mm Thread Size: 14 mm Application: The Tork Craft TCW CR are cup shaped brushing tools with carbon steel or stainless steel filaments. Part manufacturers and machine shops use them for surface preparation,deburring, and surface finishing. Brush diameter, wire size, and trim length are important to consider. Direct mounting on angle grinders For light and medium brushing Can be used on flat or irregular surfaces Bevel buf..

TorkCraft - Wire Cup Brush Crimped Width: 75 mm Thread Size: 14 mm Application: The Tork Craft TCW CR are cup shaped brushing tools with carbon steel or stainless steel filaments. Part manufacturers and machine shops use them for surface preparation,deburring, and surface finishing. Brush diameter, wire size, and trim length are important to consider. Direct mounting on angle grinders For light and medium brushing Can be used on flat or irregular surfaces Bevel buf..

Backing pad Rubber backing pad to be used with a drill DIA: 125mm (5') HOLES: No ARBOR: Ø6mm Hook & Loop: No Application: This is a backing pad for fibre discs or polishing bonnets. The backing pad is fitted with an arbor to be used with electric or cordless drills. The rubber is flexible and allows  for flat or contoured sanding without gouging. Attention: Wear eye, face and body protection....

Tork Craft Rotary Rasp V-Point — 4-24 mm (Cat No. TC RF06) Packaging: Carded (for retail display) This 4-24 mm V-point rotary rasp from Tork Craft gives you a tapering cutting profile that excels when you need to remove material quickly and cleanly. Whether you’re shaping wood, trimming plastic or removing light weld spatter from soft metals, the V-point geometry accelerates cut-action, while the hardened steel body and standard ¼″ (6.35 mm) shank make it a versatile addition to your bit col..

Tork Craft Sanding Triangles — 60 Grit, 145 × 145 × 100 mm (5-Pack, Hook-and-Loop, for TCMS) Tackle tough stock removal in corners and along edges with Tork Craft P60 sanding triangles. Sized to the popular 145 × 145 × 100 mm delta footprint and finished with a fast-change hook-and-loop backing, these sheets are made for TCMS multi-sand ers and compatible triangular sanders. The coarse P60 grit chews through coatings and levels surfaces fast—ideal for renovation and prep work.....

Tork Craft Sanding Triangle — 80 Grit, 145 × 145 × 100 mm (5-Pack, Hook-and-Loop) Step up from heavy removal to controlled shaping with the Tork Craft 80-grit sanding triangles. These triangular sanding sheets, sized 145 × 145 × 100 mm, are built for TCMS multi-sanders and other tools that support hook-and-loop triangles. The P80 grit gives a strong, consistent cut while still leaving surfaces ready for the next finer grit.....

Tork Craft Sanding Triangles — 120 Grit, 145 × 145 × 100 mm (5-Pack, Hook-and-Loop) Smooth, controlled finishing that still gets things done. Tork Craft P120 sanding triangles refine surfaces after coarse shaping, remove P80 scratches, and set you up for paint or finer grits. The 145 × 145 × 100 mm delta shape slips into corners and edges, and the hook-and-loop backing makes swaps instant on TCMS and compatible triangle sanders.....

Tork Craft Sanding Triangles — 180 Grit, 145 × 145 × 100 mm (5-Pack, Hook-and-Loop) Enter the fine finishing stage with Tork Craft P180 triangles. This grit knocks back minor scratches, smooths edges and prepares your surfaces for P240+ or sealing. The delta-shaped 145 × 145 × 100 mm sheets reach corners effortlessly, while the hook-and-loop backing keeps changes quick and secure on TCMS and compatible pads.....

Tork Craft Dead-Blow Hammer — 1.3 kg (3 lb) (Model TC61400) This Tork Craft dead-blow hammer features a 1.3 kg (3 lb) black head with an internal cavity filled with fine steel shot. The design dramatically reduces rebound and transfers more energy into the workpiece rather than into your arm, making it ideal for mechanical fitting, flange alignment, mould and die work, and general site tasks requiring controlled strikes.....

Tork Craft Replacement Red Ink — 0.5 ml for Blotting Tape (Model ME07825-01) The Tork Craft ME07825-01 is a 0.5 ml replacement red ink refill compatible with the Tork Craft blotting tape applicator (ME07825). Specially formulated to provide smooth, vivid markings on a range of construction and workshop surfaces, it ensures accuracy and clarity in every layout job.....