TORK CRAFT

Tork Craft Pilot Pin for TCT Cutters — 18–102 mm × 35 mm (Model TCAC0005-02) The Tork Craft TCAC0005-02 pilot pin is designed for tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm diameter, supporting a 35 mm cutting depth. The robust 7.9 mm × 90 mm shank provides secure engagement with standard drill systems, and the precision pilot drill center ensures accurate hole placement and reliable slug ejection for efficient drilling operations.....

Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04) The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank ensures secure engagement with standard drill systems, and the precision pilot drill center ensures accurate hole placement and reliable slug ejection for efficient drilling operations.....

Flange spanner Application: A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø4mm....

Tork Craft Pin Spanner 35 × 4 mm Offset for Angle Grinders Heading: 35 mm pin diameter × 4 mm pin thickness – offset design for angle grinder flange nuts The Tork Craft TCPS3507 pin spanner is a purpose-built offset wrench designed for securely loosening and tightening the outer flange nut on angle grinders. With two pins sized 35 × 4 mm it matches the locking ring configuration found on many 115 mm and 125 mm (4½″/5″) angle grinders. Its offset handle gives added clearance when wor..

Flange spanner A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø5mm....

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit At a Glance: ; Replacement pinion shaft and key set covering stand parts 10-13 for the TCMD0055QE. If the feed action on your magnetic base drill feels sloppy, uneven, or starts slipping under load, the pinion shaft and key are prime suspects. This Tork Craft Pinion Shaft & Key stand service kit (parts 10-13) is made to restore solid engagement in the feed/drive mechanism on the TCMD0055QE, helping you get back to controlled, confiden..

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit (TCMD0035QE-SK019) At a Glance: Replacement pinion shaft and key for the TCMD0035QE stand—diagram parts (10–13) to restore solid feed engagement and smooth travel. The stand feed should feel direct: turn the handle, the head moves—smoothly and without surprises. When the pinion shaft or key wears, slips, or shears, you can get dead spots, uneven engagement, clicking under load, or sloppy movement that makes accurate drill..

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlled moveme..

Tork Craft Pinion Shaft & Key (17, 18) Stand Service Kit (TCMD0068HD-SK18) At a Glance: Replacement pinion shaft and key for stand reference parts (17 and 18) on TCMD0068HD mag base drills. The pinion shaft is the heart of the stand’s feed mechanism—translating your handle movement into smooth, controlled travel along the rail. If the pinion shaft or key is worn, damaged, or has developed play, the feed can feel sloppy, uneven, or prone to slipping—leading to chatter and less accurate dril..

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035-50HD-SK16) At a Glance: Replacement pinion shaft and key for the TCMD0035-50HD stand—diagram parts (24/25) for positive drive and smooth feed control. The pinion shaft is a small part with a big job: it transfers your handle input into controlled feed movement through the stand’s gear system. If the shaft is worn or the key is damaged, you can get slipping, uneven feed, extra play, or that nasty “jump” feeling t..

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035HD-SK16) At a Glance: Replacement pinion shaft & key for the TCMD0035HD stand (parts 24/25) to restore solid feed engagement and smooth travel. The feed on a core drill stand should feel confident and predictable—turn the handle, the head moves. No slipping, no “dead spots”, no crunchy surprises. The Tork Craft TCMD0035HD-SK16 Pinion Shaft & Key Stand Service Kit replaces the components referenced as parts (24/25..

Tork Craft Pinion Shaft & Key (4, 5) Stand Service Kit (TCMD0035-SK16) At a Glance: Replacement pinion shaft and key for stand assembly reference parts (4 and 5) on TCMD0035 series mag base drills. On a mag base drill stand, the pinion shaft is the mechanical handshake between your feed handle and the drill’s vertical movement. When it wears, slips, or develops play, you’ll feel it as rough feeding, inconsistent engagement, or a “dead spot” when turning the handle. The Tork Craft TCMD0035-..