TORK CRAFT

35mm MAGNETIC BASE DRILL 16000N The magnetic base drill is fitted on a permanent magnet with a maximum core drill capacity of 35mm. The speed is adjustable electronically between 100-810 rpm. Application: Building construction Bridge construction Ship/Marine Construction Annular cutters or twist drill bits Horizontal or overhead drilling Great for horizontal, side face and top face drilling....

Tork Craft Magnet & Motor Switch Set (43/45) Stand Service Kit (TCMD0035WO-SK23) At a Glance: Replacement magnet and motor switch set for the TCMD0035WO—diagram parts (43/45) for reliable holding power and dependable start/stop control. A mag base drill’s two non-negotiables are simple: the magnet must hold and the motor must respond. If either switch becomes intermittent, sticky, or unreliable, you end up with unpredictable behaviour—and that’s not just annoying, it’s unsafe...

Tork Craft Magnet and Motor Switch Set (61 63) Stand Service Kit At a Glance: Replacement magnet and motor switch set (parts 61 & 63) for safe control and dependable operation Magnetic base drills don’t do “maybe” — the magnet and motor controls need to be positive, reliable and consistent every single time. If a switch feels loose, sticks, arcs, becomes intermittent, or simply refuses to behave, it’s time to replace it before it becomes a safety problem. The Tork Craft Magnet and Motor Switch..

Tork Craft Magnet & Motor Switch Set (61/63) Stand Service Kit (TCMD0035QE-SK025) At a Glance: Replacement magnet and motor switch set for the TCMD0035QE—diagram parts (61/63) for reliable holding power and dependable start/stop control. A mag base core drill has two “must-work-every-time” controls: the magnet (for secure holding) and the motor (for predictable drilling power). If either switch becomes intermittent, sticky, or unreliable, the whole job turns into guesswork—and..

Tork Craft Magnetic Bit Holder — 100 mm Universal Quick-Release, 1/4' Hex (Model T-BH30100) The Tork Craft T-BH30100 magnetic bit holder provides reliable bit retention and easy quick-release operation. With a 100 mm extension and a 1/4' hex shank, it’s ideal for reaching into confined spaces and for driving screws where precision and control are key. The strong magnet keeps your bit and fastener firmly in place during use.....

Tork Craft Magnetic Bit Holder — 150 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010150) Extend your reach and speed up bit changes. The Tork Craft T-BH21010150 is a 150 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.....

Tork Craft Magnetic Bit Holder — 300 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010300) Extend your reach and speed up bit changes. The Tork Craft T-BH21010300 is a 300 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.....

Magnetic bit holder Hex shank: 6.35mm (1/4') Length: 54mm Packaging: Bulk Application: The bit holder is used with all hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in place and to assist with holding screws when screwdriving. The shank is compatible with the Snap-it! Quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector....

Tork Craft Magnetic Bit Holder 57mm Impact 1/4 Bulk At a Glance: 57mm impact-ready magnetic bit holder with 1/4' hex drive for fast bit changes and better screw control. The Tork Craft TCIBH54B magnetic bit holder is a workshop essential for quicker bit swaps and more controlled driving—especially when you're running an impact driver all day. With a 57mm length, it gives you improved reach and visibility while the magnetic tip helps hold screws in place for easier one-handed starts. Design..

TorkCraft - Magnetic Bit Holder Impact Type: 1/4 Size: 57mm Application: Impact bits and bit holders provides extended lifetime compared to standard insert bits and bit holders. For driving screws when using an impact driver or in high torque applications. Spinning collar on quick change bit holder allows for precision work Precision tip for better fitment which reduces stripping and increases durability Torsion zone absorbs impact force and high torque output..